GEARS
codedescriptionpackingUSD
1POLYMER GEARS 80 PITCH ELITE 3/32 AXLE
polymer gears 80 pitch, for 3/32" axle, only selected ones, high quality and accuracy, for demanding racers, tested on our roll tester, available in 44, 45 teeth
ea4.90
1-AGHIGHLY DURABLE GEARS 80 PITCH GLUED TO AXLE 3/32
gears 45T glued to axle #23, hub diameter milled down to 3,7mm (.145"), ideal for Eurosport 24
ea15.00
1-BHIGHLY DURABLE GEARS 80 PITCH
new highly durable polymer gears 80 pitch, for 3/32" axle, only selected ones, high quality and accuracy, for demanding racers, tested on our roll tester, crash resistant, available in 44, 45 teeth
ea6.20
2POLYMER GEARS 80 PITCH ELITE 2MM AXLE
polymer gears 80 pitch, for 2mm axle, only selected ones, high quality and accuracy, for demanding racers, tested on our roll tester, available in 44, 45 teeth
ea4.90
2-AGHIGHLY DURABLE GEARS 80 PITCH GLUED TO AXLE 2MM
gears 44T glued to axle #24, hub diameter milled down to 3,7mm (.145"), total width of hub milled down to 3,8mm (.149"), ideal for Sport32
ea17.00
2-BHIGHLY DURABLE GEARS 80 PITCH 2MM AXLE
new highly durable polymer gears 80 pitch, for 2mm axle, only selected ones, high quality and accuracy, for demanding racers, tested on our roll tester, crash resistant, available in 44 teeth
ea6.20
3POLYMER GEARS 72 PITCH ANGLED 2°
polymer gears 72 pitch, for 3/32" axle, 42, 43, 44 teeth angled by 2°, especially shaped teeth works perfectly with any pinion, tested on US NATS in 2002 and won in nearly all categories
ea5.20
3-BHIGHLY DURABLE GEARS 72 PITCH ANGLED 2°
new highly durable polymer gears 72 pitch, for 3/32" axle, only selected ones, high quality and accuracy, for demanding racers, tested on our roll tester, crash resistant, available in 42, 43 teeth, angled by 2°
ea6.20
4POLYMER GEARS 72 PITCH ANGLED 16°
polymer gears 72 pitch, for 3/32" axle, 41, 42, 43, 44 teeth angled by 16°, especially shaped teeth works perfectly with any pinion
ea5.20
4-BHIGHLY DURABLE GEARS 72 PITCH ANGLED 16°
new highly durable polymer gears 72 pitch, for 3/32" axle, only selected ones, high quality and accuracy, for demanding racers, tested on our roll tester, crash resistant, available in 41T, 42T, 43T, angled by 16°
ea6.20
5POLYMER GEARS 72 PITCH STRAIGHT ELITE
polymer gears 72 pitch, for 3/32" axle, but only selected ones, high quality and accuracy, for demanding racers, tested on our roll tester, available in 40, 41 teeth, gears perfect for Eurosport 24
ea4.90
5-AGHIGHLY DURABLE GEARS 72 PITCH GLUED TO AXLE 3/32
gears 39T, 40T glued to axle #23, hub diameter milled down to 3,7mm (.145"), ideal for Eurosport 24
ea15.00
5-AG-2HIGHLY DURABLE GEARS 72 PITCH GLUED TO AXLE 2MM
gears 38T (corrected) and 39T glued to axle 2mm, hub diameter milled down to 3,7mm (.145"), total width of hub milled down to 3,8mm (.149"), ideal for Sport 32
ea17.00
5-BHIGHLY DURABLE GEARS 72 PITCH
new highly durable polymer gears 72 pitch, for 3/32" axle, only selected ones, high quality and accuracy, for demanding racers, tested on our roll tester, crash resistant, available in 39T, 40T, 41T
ea6.20
5-B-2HIGHLY DURABLE GEARS 72 PITCH FOR 2MM AXLE
new highly durable polymer gears 72 pitch, for 2mm axle, only selected ones, high quality and accuracy, for demanding racers, tested on our roll tester, crash resistant, available in 39 and 40 teeth
ea6.20
5-BCHIGHLY DURABLE GEARS 72 PITCH
new highly durable polymer gears 72 pitch, for 3/32" axle, only selected ones, high quality and accuracy, for demanding racers, tested on our roll tester, crash resistant, tooth shape corrected so this gear has the same diameter as 39T, available in 38 teeth
ea6.20
5-BC-2HIGHLY DURABLE GEARS 72 PITCH FOR 2MM AXLE
new highly durable polymer gears 72 pitch, for 2mm axle, only selected ones, high quality and accuracy, for demanding racers, tested on our roll tester, crash resistant, tooth shape corrected so this gear has the same diameter as 39T, available in 38 teeth
ea6.20
6POLYMER GEARS 64 PITCH ELITE
polymer gears 64 pitch, for 3/32" axle, but only selected ones, high quality and accuracy, for demanding racers, tested on our roll tester, available in 35, 36, 37, 38, 39 teeth
ea4.90
6-AGHIGHLY DURABLE GEARS 64 PITCH GLUED TO AXLE 3/32
gears 64 pitch 35T, 36T glued to axle #23, hub diameter milled down to 3,7mm (.145")
ea15.00
6-BHIGHLY DURABLE GEARS 64 PITCH
new highly durable polymer gears 64 pitch, for 3/32" axle, only selected ones, high quality and accuracy, for demanding racers, tested on our roll tester, crash resistant, available in 35, 36 teeth
ea6.20
8HIGHLY DURABLE SPECIAL GEARS 64 PITCH FOR G7 RACING
new highly durable polymer gears 64 pitch, 37T, 38T, 39T, for 3/32" axle, only selected ones, high quality and accuracy, for demanding racers, tested on our roll tester, crash resistant
ea6.20
11POLYMER GEARS 64 PITCH ANGLED 16°
polymer gears 64 pitch, for 3/32" axle, angled 16°, selected ones, high quality and accuracy, for demanding racers, tested on our roll tester, available in 37, 38, 39 teeth
ea5.20
11-SPOLYMER GEARS 64 PITCH ANGLED 15°
polymer gears 64 pitch, for 3/32" axle, angled 15°, selected ones, high quality and accuracy, for demanding racers, tested on our roll tester, available in 36 teeth
ea5.20




PINIONS
codedescriptionpackingUSD
12ARP PINIONS 64 PITCH BLACK COVER
ARP pinions 64 pitch 7T - 2mm hole, plated with special black cover especially developed for Cahoza, this cover enhances lubricity 8 times and repels solder so teeth cannot be soldered through, higher resistance
ea12.00
13EDM PINIONS 80 PITCH
EDM pinions 80 pitch 6T - 1,5mm hole, very accurate, tolerance +/- 0,0005mm, plated with special black cover especially developed for Cahoza, this cover enhances lubricity 8 times and repels solder so teeth cannot be soldered through, after application the pinion hole is firmly cut to exact size and solder then sticks perfectly in, made from stainless steel 45 HRc, suitable for all types of gears, ideal for Cahoza 80 pitch gears
ea25.00
13-AEDM PINIONS 80 PITCH
EDM pinions 80 pitch 6T - 1,2mm hole, very accurate, tolerance +/- 0,0005mm, plated with special black cover especially developed for Cahoza, this cover enhances lubricity 8 times and repels solder so teeth cannot be soldered through, after application the pinion hole is firmly cut to exact size and solder then sticks perfectly in, made from stainless steel 45 HRc, suitable for all types of gears, ideal for Cahoza 80 pitch gears
ea28.00
14EDM PINIONS 72 PITCH
EDM pinions 72 pitch 6T - 1,5mm hole, very accurate, tolerance +/- 0,0005mm, plated with special black cover especially developed for Cahoza, this cover enhances lubricity 8 times and repels solder so teeth cannot be soldered through, after application the pinion hole is firmly cut to exact size and solder then sticks perfectly in, made from stainless steel 45 HRc, suitable for all types of gears, ideal for Cahoza 72 pitch gears
ea25.00
14AEDM PINIONS 72 PITCH
EDM pinions 72 pitch 6T - 1,2mm hole, very accurate, tolerance +/- 0,0005mm, plated with special black cover especially developed for Cahoza, this cover enhances lubricity 8 times and repels solder so teeth cannot be soldered through, after application the pinion hole is firmly cut to exact size and solder then sticks perfectly in, made from stainless steel 45 HRc, suitable for all types of gears, ideal for Cahoza 72 pitch gears
ea28.00
15EDM PINIONS 72 PITCH
EDM pinions 72 pitch 7T - 2mm hole, very accurate, tolerance +/- 0,0005mm, plated with special black cover especially developed for Cahoza, this cover enhances lubricity 8 times and repels solder so teeth cannot be soldered through, after application the pinion hole is firmly cut to exact size and solder then sticks perfectly in, made from stainless steel 45 HRc, suitable for all types of gears, ideal for Cahoza 72 pitch gears
ea25.00
16CAMEN PINIONS 64 PITCH BLACK COVER
Camen pinions 64 pitch 6T - 2mm hole, plated with special black cover especially developed for Cahoza, this cover enhances lubricity 8 times and repels solder so teeth cannot be soldered through, higher resistance
ea12.00
17NEW EDM PINIONS 72 PITCH
NEW EDM pinions 72 pitch 5T - 1,5mm hole, very accurate, tolerance +/- 0,0005mm, plated with special black cover especially developed for Cahoza, this cover enhances lubricity 8 times and repels solder so teeth cannot be soldered through, after application the pinion hole is firmly cut to exact size and solder then sticks perfectly in, made from stainless steel 45 HRc, suitable for all types of gears, ideal for Cahoza 72 pitch gears
ea25.00
17ANEW EDM PINIONS 72 PITCH
NEW EDM pinions 72 pitch 5T - 1,2mm hole, very accurate, tolerance +/- 0,0005mm, plated with special black cover especially developed for Cahoza, this cover enhances lubricity 8 times and repels solder so teeth cannot be soldered through, after application the pinion hole is firmly cut to exact size and solder then sticks perfectly in, made from stainless steel 45 HRc, suitable for all types of gears, ideal for Cahoza 72 pitch gears
ea28.00
18NEW EDM PINIONS 64 PITCH
NEW EDM pinions 64 pitch 5T - 1,2mm hole, very accurate, tolerance +/- 0,0005mm, plated with special black cover especially developed for Cahoza, this cover enhances lubricity 8 times and repels solder so teeth cannot be soldered through, after application the pinion hole is firmly cut to exact size and solder then sticks perfectly in, made from stainless steel 45 HRc, suitable for all types of gears, ideal for Cahoza 64 pitch gears
ea28.00




AXLES & EPOXY
codedescriptionpackingUSD
22TOUGH EPOXY
Cahoza high temperature epoxy, single component oven cure adhesive, grey color, cure procedure is 60°C(140F) for 15min., 80°C(176F) for 10min., 100°C(212F) for 10min., 120°C(248F) for 10min. and finish at 140°C(284F) for 30min., the epoxy stays hard even at 160°C(320F) and resists up to 200°C(392F), the advantage is that it perfectly adheres to every material, you can glue magnets, even samario-cobalt ones, hardware, ball bearings and so on, this epoxy is better than Koford #345, because resists higher temperatures and you can cure it at lower temperatures, packed in tubs by 6ml (10g)
ea5.60
23SOLID AXLE 3/32
solid 3/32" axle, highly durable 60HRc, axle is very fine grinded and polished, the 3/32" diameter is very accurate with maximum deflection of 0,001 mm (.00004"), great straightness along the entire length, it is crooked to max. 0,01 mm (.0004") throughout the entire length, ends are also grinded, exact diameter of this axle is 2,371 mm (.093346"), the best axle ever available for profi racing
ea11.20
23BPLATED SOLID AXLE 3/32
the same as #23, but plated with special black cover especially developed for Cahoza, the same cover as used with pinions, these axles are higher quality than #23, because the layer hardens the axle and has 8 times more lubricity than plain axles, fantastic for oilites due to conserving longer durability of oilites
ea11.60
24SOLID AXLE 2MM
solid 2mm axle, highly durable 60HRc, axle is very fine grinded and polished, the 2mm diameter is very accurate with maximum deflection of 0,001 mm (.00004"), great straightness along the entire length, it is crooked to max. 0,01 mm (.0004") throughout the entire length, ends are also grinded, exact diameter of this axle is 1,992mm (.07838"), lenght is 51mm (2") the best axle ever available for Scale racing
ea7.00




GUIDES AND NUTS
codedescriptionpackingUSD
25GRAPHITE GUIDE
graphite guide which is a copy of the Starburst guide, innovated, there is no chance of cutting the guide tongue into the braid holder, this guide is more professionaly made than any other guide, content: nylon, glass fibre, graphite
ea2.15
25-TGRAPHITE GUIDE - THREADED
graphite guide which is a copy of the Starburst guide, innovated, there is no chance of cutting the guide tongue into the braid holder, this guide is more professionaly made than any other guide, content: nylon, glass fibre, graphite -- threaded
ea2.60
27CUT DOWN NYLON GUIDE
cut down guide for integral guide tongue chassis, content: violet nylon, glass fibre, these guides have less content of glass fibre, they are more tough, ideal for Production chassis and other groups
ea2.15
27-TCUT DOWN NYLON GUIDE - THREADED
cut down guide for integral guide tongue chassis, content: violet nylon, glass fibre, these guides have less content of glass fibre, they are more tough, ideal for Production chassis and other groups -- threaded
ea2.60
28CUT DOWN GRAPHITE NYLON GUIDE
cut down guide for integral guide tongue chassis, content: black nylon, glass fibre, graphite
ea2.15
28-TCUT DOWN GRAPHITE NYLON GUIDE - THREADED
cut down guide for integral guide tongue chassis, content: black nylon, glass fibre, graphite -- threaded
ea2.60
29GUIDE CLIPS SHORT
guide clips for all types of guides, manufactured from tough brass plate, thickness 0,3mm (.0118"), lead wires are soldered through windows in guide, packaged 10 pairs per bag
bag20.10
30GUIDE CLIPS LONG
guide clips for all types of guides, manufactured from tough brass plate, thickness 0,3mm (.0118"), lead wires are soldered onto the top side of the clip, packaged 10 pairs per bag
bag21.10
31GUIDE NUTS 9MM
aluminium guide nuts, professionaly made on a CNC machine, including the hexagon shape, absolutely precise, size is 9mm (.354"), packaged 10pcs per bag
bag34.50
32-TELASTIC AND TOUGH GUIDE - THREADED
elastic and tough guide which is a copy of the Starburst guide, innovated, there is no chance of cutting the guide tongue into the braid holder, this guide is more professionaly made than any other guide, content: black nylon, glass fibre -- threaded
ea2.60




SPACERS
codedescriptionpackingUSD
35PBPHOSPHOR BRONZE SPACERS 3/32
phosphor bronze axle spacers, 0,25mm (.01"), very hard but will not stick to magnets, packaged 24 per bag
bag5.80
36PHOSPHOR BRONZE SPACERS 0,1
phosphor bronze spacers, thickness 0,1 mm (.004"), ultra precision fit on armature shaft to eliminate vibration due to loose fit, phosphor bronze is very hard, but will not stick to magnets, packaged 24 per bag
bag5.40
37PHOSPHOR BRONZE SPACERS 0,18
the same as #36, but thickness is 0,18mm (.007"), packaged 24 per bag
bag5.60
38PHOSPHOR BRONZE SPACERS 0,3
the same as #36, but thickness is 0,3mm (.0118"), packaged 24 per bag
bag5.80




FRONT WHEELS & RIMS
codedescriptionpackingUSD
40FRONT WHEELS
super light front wheels, spoked and made from black rubber, mount on a straight pin or on a piano wire, diameter 13mm (.511"), thickness 0,8mm (.0314"), axle bore diameter 1mm (.039"), packaged by 10 pairs
bag13.00
41NEW FIBRE CARBON PLASTIC RIMS
new Cahoza plastic eurorims, for 3/32" axles, diameter 11mm (.433"), width 20mm (.787"), these rims are manufactured using new fibre carbon polymer, these rims are very precise and rotational accuracy is 0,07mm (.0027") at maximum, thickness of side at hub is 0,8mm (.031), one pair of 11mm rims weigh 1,7grammes
pair6.60
42NEW FIBRE CARBON PLASTIC RIMS FOR 2MM AXLE
new Cahoza plastic eurorims, for 2mm axles, diameter 11mm (.433"), width 20mm (.787"), these rims are manufactured using new fibre carbon polymer, these rims are very precise and rotational accuracy is 0,03mm (.0012") at maximum, weight is 1,77grammes
pair6.60
43NEW FIBRE CARBON PLASTIC RIMS FOR 2MM AXLE
the same as #42, but shortened to length 15,8mm (.622"), on the hub side the inside diameter is milled to wall thickness 0,35mm (.0137"), weight of one pair is 1,48grammes
pair6.90




SILVER SOLDER
codedescriptionpackingUSD
44SILVER SOLDER
new excellent high temperature silver solder with perfect flux core (non corrosive flux), this solder is 94.8% tin and 5.2% silver, diameter 1mm, long 6 feet (1,8m)
ea5.20




BALL BEARINGS
codedescriptionpackingUSD
45MOTOR BALL BEARING -- OPEN
standard can and endbell open ball bearing, made from stainless steeel, has extra low play for better motor performance and high speed retainer for long life and the minimum possible vibration, size is 2x5mm, width 1,5mm, Japan top quality bearings
ea7.80
45FMOTOR AND 2MM AXLE BALL BEARING -- OPEN & FLANGED
standard can and 2mm axle open & flanged ball bearing, made from stainless steeel, has extra low play for better motor performance and high speed retainer for long life and the minimum possible vibration, ideal for rear axle on Formel32 and Sport32, size is 2x5mm, width 1,5mm, Japan top quality bearings
ea8.40
46MOTOR BALL BEARING -- SHIELDED
standard can and endbell shielded ball bearing, made from stainless steeel, has extra low play for better motor performance and high speed retainer for long life and the minimum possible vibration, size is 2x5mm, width 2,3mm, Japan top quality bearings
ea9.30
47MOTOR BALL BEARING -- SHIELDED & FLANGED
standard can and endbell shielded & flanged ball bearing, made from stainless steeel, has extra low play for better motor performance and high speed retainer for long life and the minimum possible vibration, size is 2x5mm, width 2,3mm
ea10.20
483/32
axle 3/32" shielded & flanged ball bearing, made from stainless steel, has extra low play for better performance and high speed retainer for long life and the minimum possible vibration, width 2,4mm, these bearings have lower friction and are suitable for higher speeds, Japan top quality bearings
pair24.20
49GRW MOTOR BALL BEARINGS
precise can and endbell shielded GRW ball bearing, made from stainless steeel, has extra low play for better motor performance and high speed retainer for long life and the minimum possible vibration, size is 2x5mm, width 2,3mm, German super top quality ball bearings, these ball bearings are being tested in Germany by manufacturer, only selected pieces with top quality are choosen
ea10.20
50GRW MOTOR BALL BEARINGS - SHIELDED & FLANGED
precise can and endbell shielded and flanged GRW ball bearing, made from stainless steeel, has extra low play for better motor performance and high speed retainer for long life and the minimum possible vibration, size is 2x5mm, width 2,3mm, German super top quality ball bearings, these ball bearings are being tested in Germany by manufacturer, only selected pieces with top quality are choosen
ea13.20
51GRW MOTOR BALL BEARING -- OPEN
precise motor GRW ball bearing, made from stainless steeel, has extra low play for better motor performance and high speed retainer for long life and the minimum possible vibration, size is 2x5mm, width 1,5mm, German super top quality ball bearings, these ball bearings are being tested in Germany by manufacturer, only selected pieces with top quality are choosen
ea9.20




TOOLS
codedescriptionpackingUSD
65DIAMOND COATED BRUSH RADIUS TOOL
diamond coated brush radius tool, diameter 5,3mm (.208"), includes anodised knurled grip
ea42.00
66ALUMINIUM WRENCH
super light anodised aluminium wrench, tip 0.050" gold covered, comes in red and graphite colours
ea27.00
67DIAMOND CUTTING TOOL
CAHOZA stocks a super diamond cutting tool for turning commutators. With these you get very easy right next to commutator cup and you can turn any commutator with it. The angle of a tip is only 20°, and ​side clearance angle is 10°​, tip has nose radius of R0.12​ mm. These cutting tools were made in Switzerland from the finest diamond and are ground on machines like real diamonds. Cutting tools are perfect, working free of burrs and it is really 100% quality.
ea215.00




CANS G27
codedescriptionpackingUSD
80FULL COVERAGE CAN DIA .630 LIGHT
full coverage can for G27 racing, magnet height 10,7mm (.421"), total length 16,8mm (.661"), inside diameter for magnets 16,1mm (.633"), outside diameter grinded to 17mm (.669"), diameter for endbell is 16mm (.630")
ea52.50




MINI SETUPS AND PARTS FOR SCALE
codedescriptionpackingUSD
100F1/32 SETUP
Write to radim@cahoza.cz to get the actual list of Scale setups. Price included there as well.
ea0.00
101SPORT 32 SETUP 16V
Write to radim@cahoza.cz to get the actual list of Scale setups. Price included there as well.
ea0.00
102SPORT 32 SETUP
Write to radim@cahoza.cz to get the actual list of Scale setups. Price included there as well.
ea0.00
103EUROSPORT SETUP 24
Write to radim@cahoza.cz to get the actual list of Scale setups. Price included there as well.
ea0.00
104EUROSPORT SETUP 24V
Write to radim@cahoza.cz to get the actual list of Scale setups. Price included there as well.
ea0.00
104-AEUROSPORT SETUP 28V
Write to radim@cahoza.cz to get the actual list of Scale setups. Price included there as well.
ea0.00
105ASSEMBLED ENDBELL FOR F1/32
assembled endbell for F1/32, gold plated horizontal hardware #108, 3 coil anodised spring posts, stainless steel ball bearing included
ea68.00
106ASSEMBLED ENDBELL FOR SPORT 32
assembled endbell for Sport 32, gold plated vertical hardware #109, 5 coil anodised spring posts, stainless steel ball bearing included, long tower for PK arms (with commudator cap)
ea68.00
107ASSEMBLED ENDBELL FOR EUROSPORT 24
assembled endbell for Eurosport 24, gold plated vertical hardware #170, 5 coil anodised spring posts, stainless steel ball bearing included, long tower for PK arms (with commudator cap)
ea68.00
108NEW GOLD PLATED HORIZONTAL HARDWARE FOR F1/32
NEW aluminium gold plated horizontal hardware, high precision, this hardware have got larger cooling surface, deeper brush slots, another novelty is an upper little hook that ensures hardware will not tear off the endbell, bottom holes are for M1 screws and holes are situated differently than at #171
pair21.00
109NEW GOLD PLATED VERTICAL HARDWARE FOR SPORT 32
NEW aluminium gold plated vertical hardware, high precision, this hardware have got larger cooling surface, deeper brush slots, another novelty is an upper little hook that ensures hardware will not tear off the endbell, bottom holes are for M1 screws and holes are situated differently than at #170
pair21.00
110SINGLE ENDBELL FOR F1/32
aluminium hard anodised single endbell for F1/32 cans, lightened, better dissipates heat away, for arms without commudator caps, distance A=1,1mm (.043"), C=6,4mm (.252"), pattern hole drilled for hardware #108, diameter for cans is 14,5mm (.570")
ea48.00
111SINGLE ENDBELL FOR SPORT 32
aluminium hard anodised single endbell for Sport 32 cans, lightened, better dissipates heat away, for arms with commudator caps, distance A=1,1mm (.043"), C=8,1mm (.318"), pattern hole drilled for hardware #109, diameter for cans is 14,5mm (.570")
ea48.00
112SINGLE ENDBELL FOR EUROSPORT 24
aluminium hard anodised single endbell for Eurosport 24 cans, lightened, better dissipates heat away, for arms with commudator cups, distance A=1,1mm (.043"), C=8,1mm (.318"), pattern hole drilled for hardware #170, diameter for cans is 14,5mm (.570")
ea48.00
113SCREWS AND INSULATORS
stainless steel M1 screws, for endbells F1/32 and Sport 32, including insulators, set contains 6 pcs of screws and 6 pcs of insulators
bag8.00
115CAN FOR FORMEL 32
the same can that is used in F1/32 setup #100
ea48.00
116CAN FOR SPORT 32
the same can that is used in Sport 32 setup #101
ea48.00
117CAN FOR EUROSPORT 24
the same can that is used in Eurosport 24 setup #102 or #103
ea48.00




SINGLE ENDBELLS
codedescriptionpackingUSD
123SINGLE ENDBELL .610
aluminium hard anodised endbell for Cahoza cans dia.610, lightened, better dissipates heat away, for arms without commudator caps (G27 arms, G7 Koford arms, G7 Pro Slot arms), distance A=1,1mm (.043"), C=6,4mm (.252"), diameter for cans is 15,5mm (.610"), pattern hole drilled for both types of hardware - horizontal and vertical
ea40.00
123-4SINGLE ENDBELL .610 +4° ROTATION
aluminium hard anodised endbell for Cahoza cans dia.610, lightened, better dissipates heat away, for arms without commudator caps (G27 arms, G7 Koford arms, G7 Pro Slot arms), distance A=1,1mm (.043"), C=6,4mm (.252"), diameter for cans is 15,5mm (.610"), pattern hole drilled for both types of hardware - horizontal and vertical and turned to +4°
ea40.00
126SINGLE ENDBELL FOR G12 CANS
aluminium hard anodised single endbell for G12 Cahoza C-cans, lightened, pattern hole drilled for hardware #170 and #171
ea48.00
126-4SINGLE ENDBELL FOR G12 CANS +4° ROTATION
aluminium hard anodised single endbell for G12 Cahoza C-cans, lightened, pattern hole drilled for hardware #170 and #171 and turned to +4°
ea48.00
127NEW SINGLE ENDBELL TALLER .610
new aluminium hard black anodised single endbell for Cahoza cans dia.610, lightened, longer endbell tower, better dissipates heat away, for arms with commudator caps (PK arms), distance A=1,1mm (.043"), C=8,5mm (.334"), pattern hole drilled for both types of hardware - horizontal and vertical, diameter for cans is 15,5mm (.610"), these endbells are manufactured for shielded ball bearings 2,3mm (.090) wide
ea40.00
127-4NEW SINGLE ENDBELL TALLER .610 +4° ROTATION
new aluminium hard black anodised single endbell for Cahoza cans dia.610, lightened, longer endbell tower, better dissipates heat away, for arms with commudator caps (PK arms), distance A=1,1mm (.043"), C=8,5mm (.334"), pattern hole drilled for both types of hardware - horizontal and vertical - and turned to +4°, diameter for cans is 15,5mm (.610"), these endbells are manufactured for shielded ball bearings 2,3mm (.090) wide
ea40.00
128NEW SINGLE ENDBELL TALLER .630 FOR G27 CAHOZA CAN
new aluminium hard black anodised single endbell for Cahoza cans dia.630, lightened, longer endbell tower, better dissipates heat away, for arms with commudator caps (PK arms), distance A=1,1mm (.043"), C=8,5mm (.334"), pattern hole drilled for both types of hardware - horizontal and vertical, diameter for cans is 16mm (.630"), these endbells are manufactured for shielded ball bearings 2,3mm (.090) wide, for Cahoza G27 Can #80
ea40.00
128-4NEW SINGLE ENDBELL TALLER .630 +4° ROTATION FOR G27 CAHOZA CAN
new aluminium hard black anodised single endbell for Cahoza cans dia.630, lightened, longer endbell tower, better dissipates heat away, for arms with commudator caps (PK arms), distance A=1,1mm (.043"), C=8,5mm (.334"), pattern hole drilled for both types of hardware - horizontal and vertical - and turned to +4°, diameter for cans is 16mm (.630"), these endbells are manufactured for shielded ball bearings 2,3mm (.090) wide, for Cahoza Can #80
ea40.00




ASSEMBLED ENDBELLS
codedescriptionpackingUSD
143-HASSEMBLED ENDBELL #123 HORIZONTAL
assembled endbell #123, gold plated horizontal hardware #171, 3 coil aluminium spring posts, stainless steel ball bearing included, fits Cahoza dia.610 cans
ea60.00
143-H4ASSEMBLED ENDBELL #123-4 HORIZONTAL +4° ROTATION
assembled endbell #123-4, gold plated horizontal hardware #171 turned to +4°, 3 coil aluminium spring posts, stainless steel ball bearing included, fits Cahoza dia.610 cans
ea60.00
144-VASSEMBLED ENDBELL #123 VERTICAL
assembled endbell #123, gold plated vertical hardware #170, 5 coil anodised spring posts, stainless steel ball bearing included, fits Cahoza dia.610 cans
ea60.00
144-V4ASSEMBLED ENDBELL #123-4 VERTICAL +4° ROTATION
assembled endbell #123-4, gold plated vertical hardware #170 turned to +4°, 5 coil anodised spring posts, stainless steel ball bearing included, fits Cahoza dia.610 cans
ea60.00
146ASSEMBLED ENDBELL FOR G12 CANS
new aluminium hard anodised assembled endbell for all Cahoza C-cans (G12), gold plated horizontal hardware (#171), 3coil aluminium spring posts, includes stainless steel ball bearing, diameter for cans is 21,25mm (.837"), this endbell is made from very hard aluminium, perfectly dissipates heat away from brushes
ea68.00
146-H4ASSEMBLED ENDBELL FOR G12 CANS +4° ROTATION
new aluminium hard anodised assembled endbell for all Cahoza C-cans (G12), gold plated horizontal hardware (#171) turned to +4°, 3coil aluminium spring posts, includes stainless steel ball bearing, diameter for cans is 21,25mm (.837"), this endbell is made from very hard aluminium, perfectly dissipates heat away from brushes
ea68.00
147NEW ASSEMBLED ENDBELL #127 VERTICAL - TALLER
assembled endbell #127, gold plated vertical hardware #170, 5 coil anodised spring posts, stainless steel shielded ball bearing 2,3mm wide included
ea60.00
147-4NEW ASSEMBLED ENDBELL #127-4 VERTICAL +4° ROTATION - TALLER
assembled endbell #127-4, gold plated vertical hardware #170 turned to +4°, 5 coil anodised spring posts, stainless steel shielded ball bearing 2,3mm wide included
ea60.00
148NEW ASSEMBLED ENDBELL #128 HORIZONTAL - TALLER
assembled endbell #128, gold plated horizontal hardware #171, 5 coil anodised spring posts, stainless steel shielded ball bearing 2,3mm wide included, for Cahoza Can #80
ea60.00
148-4NEW ASSEMBLED ENDBELL #128-4 HORIZONTAL +4° ROTATION - TALLER
assembled endbell #128-4, gold plated horizontal hardware #171 turned to +4°, 5 coil anodised spring posts, stainless steel shielded ball bearing 2,3mm wide included, for Cahoza Can #80
ea60.00




ENDBELL PARTS
codedescriptionpackingUSD
150COMMUDATOR CUPS
aluminium hard anodised commudator cups for G7, G27 and Scale armatures, packaged 10pcs per bag, for using these cups it is needed to mill the commudator to dia 4,72mm (+0,01mm), in length 1,3mm
bag30.00
154ANODISED SPRING POSTS - 3 COIL SPRINGS
aluminium anodised spring posts for 3 coil springs, spring post do not fit Cahoza plastic G12 endbells, suitable for hardware #170 and #171, recommended are insulators #158 or #159, packaged 10 pairs per bag
bag47.00
157ANODISED SPRING POSTS - 5 COIL SPRINGS
aluminium anodised spring posts for 5 coil springs, avaliable in red-blue and red-black combinations, suitable for hardware #170 and #171, recommended are insulators #158 or #159, packaged 10 pairs per bag
bag49.00
158PHENOLIC INSULATORS
phenolic insulators, use on all aluminium endbells, suitable for anodised spring posts #154, #157, inside diameter 1,5mm, outside diameter 3mm, thickness 0,5mm, packed by 24pcs
bag6.70
159PHENOLIC INSULATORS
phenolic insulators, use on all aluminium endbells, suitable for anodised spring posts #154, #157, inside diameter 1,5mm, outside diameter 3mm, thickness 0,3mm, packed by 24pcs
bag6.70
1605 COIL SPRINGS
Cahoza springs for Scale motors and G27 motors, made from hardened steel coated with white shiny zinc, withstands 800F, high quality and accuracy, packaged 10 pairs per bag
bag31.00
170NEW GOLD PLATED VERTICAL HARDWARE
NEW aluminium gold plated vertical hardware, high precision, this hardware have got larger cooling surface, deeper brush slots, another novelty is an upper little hook that ensures hardware will not tear off the endbell, hole pattern is the same as with #171, attention: before pressing the little hook to its final position, it is needed to grind out the layer of gold and nickel from upper side of the hook (0,05mm-0,1mm)
pair19.00
170VNEW GOLD PLATED VERTICAL HARDWARE PACK
NEW aluminium gold plated vertical hardware, high precision, this hardware have got larger cooling surface, deeper brush slots, another novelty is an upper little hook that ensures hardware will not tear off the endbell, hole pattern is the same as with #171, attention: before pressing the little hook to its final position, it is needed to grind out the layer of gold and nickel from upper side of the hook (0,05mm-0,1mm), packaged 6 pairs a bag
bag114.00
171NEW GOLD PLATED HORIZONTAL HARDWARE
NEW aluminium gold plated horizontal hardware, high precision, this hardware have got larger cooling surface, deeper brush slots, another novelty is an upper little hook that ensures hardware will not tear off the endbell, hole pattern is the same as with #170, attention: before pressing the little hook to its final position, it is needed to grind out the layer of gold and nickel from upper side of the hook (0,05mm-0,1mm)
pair19.00
171HNEW GOLD PLATED HORIZONTAL HARDWARE PACK
NEW aluminium gold plated horizontal hardware, high precision, this hardware have got larger cooling surface, deeper brush slots, another novelty is an upper little hook that ensures hardware will not tear off the endbell, hole pattern is the same as with #170, attention: before pressing the little hook to its final position, it is needed to grind out the layer of gold and nickel from upper side of the hook (0,05mm-0,1mm), packaged 6 pairs a bag
bag114.00




G12 PRODUCTION MOTORS AND SETUPS
codedescriptionpackingUSD
230C-CAN G12 MOTOR - O
Cahoza C-can motor, assembled using "O" type C-can #250, Cahoza Tornado 2 magnets, Cahoza plastic endbell, Cahoza hardware #266, Cahoza aluminium spring cups, Cahoza tapping screws, Koford flanged oilites, Koford armature M468 -- Box TriStar G12 dia .518", perfectly balanced with shortened axle and cut down commudator, Koford brushes M486, Cahoza springs #257, magnets are glued in using Cahoza single component epoxy, inside diameter of magnets is 13,45mm (.529"), weight of complete motor is only 19,2 grammes,
ea100.70
230BC-CAN G12 MOTOR - O - BEVELLED
Cahoza C-can motor, assembled using "O" type C-can #250, Cahoza Tornado 2 bevelled magnets #276, Cahoza plastic endbell, Cahoza hardware #266, Cahoza aluminium spring cups, Cahoza tapping screws, Koford flanged oilites, Koford armature M468 -- Box TriStar G12 dia .518", perfectly balanced with shortened axle and cut down commudator, Koford brushes M486, Cahoza springs #257, magnets are glued in using Cahoza single component epoxy, inside diameter of magnets is 13,45mm (.529"), weight of complete motor is only 18,2 grammes
ea105.70
230SC-CAN G12 SETUP - O
Cahoza C-can setup, assembled using "O" type C-can #250, Cahoza Tornado 2 magnets, Cahoza plastic endbell, Cahoza hardware #266, Cahoza aluminium spring cups, Cahoza tapping screws, Koford flanged oilites, magnets are glued in using Cahoza single component epoxy, inside diameter of magnets is 13,45mm (.529"), weight 11,1 grammes
ea55.80
230SBC-CAN G12 SETUP - O - BEVELLED
Cahoza C-can setup, assembled using "O" type C-can #250, Cahoza Tornado 2 bevelled magnets #276, Cahoza plastic endbell, Cahoza hardware #266, Cahoza aluminium spring cups, Cahoza tapping screws, Koford flanged oilites, magnets are glued in using Cahoza single component epoxy, inside diameter of magnets is 13,45mm (.529"), weight 10,1 grammes
ea60.80
231C-CAN G12 MOTOR - U
Cahoza C-can motor, assembled using "U" type C-can #251, Cahoza Tornado 2 magnets, Cahoza plastic endbell, Cahoza hardware #266, Cahoza aluminium spring cups, Cahoza tapping screws, Koford flanged oilites, Koford armature M468 -- Box TriStar G12 dia .518", perfectly balanced with shortened axle and cut down commudator, Koford brushes M486, Cahoza springs #257, magnets are glued in using Cahoza single component epoxy, inside diameter of magnets is 13,45mm (.529"), weight of complete motor is only 19,1 grammes
ea103.70
231BC-CAN G12 MOTOR - U - BEVELLED
Cahoza C-can motor, assembled using "U" type C-can #251, Cahoza Tornado 2 bevelled magnets #276, Cahoza plastic endbell, Cahoza hardware #266, Cahoza aluminium spring cups, Cahoza tapping screws, Koford flanged oilites, Koford armature M468 -- Box TriStar G12 dia .518", perfectly balanced with shortened axle and cut down commudator, Koford brushes M486, Cahoza springs #257, magnets are glued in using Cahoza single component epoxy, inside diameter of magnets is 13,45mm (.529"), weight of complete motor is only 18,1 grammes
ea108.70
231SC-CAN G12 SETUP - U
Cahoza C-can setup, assembled using "U" type C-can #251, Cahoza Tornado 2 magnets, Cahoza plastic endbell, Cahoza hardware #266, Cahoza aluminium spring cups, Cahoza tapping screws, Koford flanged oilites, magnets are glued in using Cahoza single component epoxy, inside diameter of magnets is 13,45mm (.529"), weight 11 grammes
ea58.80
231SBC-CAN G12 SETUP - U - BEVELLED
Cahoza C-can setup, assembled using "U" type C-can #251, Cahoza Tornado 2 bevelled magnets #276, Cahoza plastic endbell, Cahoza hardware #266, Cahoza aluminium spring cups, Cahoza tapping screws, Koford flanged oilites, magnets are glued in using Cahoza single component epoxy, inside diameter of magnets is 13,45mm (.529"), weight 10 grammes
ea63.80
232C-CAN G12 MOTOR - UL
Cahoza C-can motor, assembled using "UL" type C-can #252, Cahoza Tornado 2 magnets, Cahoza plastic endbell, Cahoza hardware #266, Cahoza aluminium spring cups, Cahoza tapping screws, Koford flanged oilites, Koford armature M468 -- Box TriStar G12 dia .518", perfectly balanced with shortened axle and cut down commudator, Koford brushes M486, Cahoza springs #257, magnets are glued in using Cahoza single component epoxy, inside diameter of magnets is 13,45mm (.529"), weight of complete motor is only 19 grammes
ea108.70
232BC-CAN G12 MOTOR - UL - BEVELLED
Cahoza C-can motor, assembled using "UL" type C-can #252, Cahoza Tornado 2 bevelled magnets #276, Cahoza plastic endbell, Cahoza hardware #266, Cahoza aluminium spring cups, Cahoza tapping screws, Koford flanged oilites, Koford armature M468 -- Box TriStar G12 dia .518", perfectly balanced with shortened axle and cut down commudator, Koford brushes M486, Cahoza springs #257, magnets are glued in using Cahoza single component epoxy, inside diameter of magnets is 13,45mm (.529"), weight of complete motor is only 18 grammes
ea113.70
232SC-CAN G12 SETUP - UL
Cahoza C-can setup, assembled using "UL" type C-can #252, Cahoza Tornado 2 magnets, Cahoza plastic endbell, Cahoza hardware #266, Cahoza aluminium spring cups, Cahoza tapping screws, Koford flanged oilites, magnets are glued in using Cahoza single component epoxy, inside diameter of magnets is 13,45mm (.529"), weight of complete setup is only 10,9 grammes
ea63.80
232SBC-CAN G12 SETUP - UL - BEVELLED
Cahoza C-can setup, assembled using "UL" type C-can #252, Cahoza Tornado 2 bevelled magnets #276, Cahoza plastic endbell, Cahoza hardware #266, Cahoza aluminium spring cups, Cahoza tapping screws, Koford flanged oilites, magnets are glued in using Cahoza single component epoxy, inside diameter of magnets is 13,45mm (.529"), weight of complete setup is only 9,9 grammes
ea68.80




G12 MOTORS - TOP BLUEPRINTED
codedescriptionpackingUSD
235-OG12 MOTOR TYPE O
Cahoza C-can motor, features new Cahoza C-can #250, Cahoza Tornado 5 magnets, Cahoza endbell #262, Cahoza spring cups, 2x5 precisely turned oilites, best Koford brushes, 3 coil springs, Koford X12 .518" armature, Cahoza screws, professionaly assembled, absolutely the most precise and the fastest among all motors, weight 19,2 grammes
ea147.40
235-UG12 MOTOR TYPE U
Cahoza C-can motor, features new Cahoza C-can #251, Cahoza Tornado 5 magnets, Cahoza endbell #262, Cahoza spring cups, 2x5 precisely turned oilites, best Koford brushes, 3 coil springs, Koford X12 .518" armature, Cahoza screws, professionaly assembled, absolutely the most precise and the fastest among all motors, weight 19,1 grammes
ea150.40
236-OG12 MOTOR TYPE O
Cahoza C-can motor, features new Cahoza C-can #250, Cahoza Tornado 5 magnets, Cahoza endbell #262, Cahoza spring cups, 2x5 precisely turned oilite in endbell, ball bearing in can, best Koford brushes, 3 coil springs, Koford X12 .518" armature, Cahoza screws, professionaly assembled, absolutely the most precise and the fastest among all motors, weight 19,2 grammes
ea159.40
236-UG12 MOTOR TYPE U
Cahoza C-can motor, features new Cahoza C-can #251, Cahoza Tornado 5 magnets, Cahoza endbell #262, Cahoza spring cups, 2x5 precisely turned oilite in endbell, ball bearing in can, best Koford brushes, 3 coil springs, Koford X12 .518" armature, Cahoza screws, professionaly assembled, absolutely the most precise and the fastest among all motors, weight 19,1 grammes
ea162.40
236-ULG12 MOTOR TYPE UL
Cahoza C-can motor, features new Cahoza C-can #252, Cahoza Tornado 5 magnets, Cahoza endbell #262, Cahoza spring cups, 2x5 precisely turned oilite in endbell, ball bearing in can, best Koford brushes, 3 coil springs, Koford X12 .518" armature, Cahoza screws, professionaly assembled, absolutely the most precise and the fastest among all motors, weight 19 grammes
ea167.40
237-OG12 MOTOR TYPE O -- GOLD
Cahoza C-can motor, features new Cahoza C-can #250, Cahoza Tornado 5 magnets, Cahoza endbell #263, Cahoza spring cups, ball bearings both in can and endbell, best Koford brushes, 3 coil teflon insulated springs, silver shunt wire, Koford X12 .518" armature, Cahoza screws, professionaly assembled, absolutely the most precise and the fastest among all motors, weight 19,2 grammes
ea179.80
237-UG12 MOTOR TYPE U -- GOLD
Cahoza C-can motor, features new Cahoza C-can #251, Cahoza Tornado 5 magnets, Cahoza endbell #263, Cahoza spring cups, ball bearings both in can and endbell, best Koford brushes, 3 coil teflon insulated springs, silver shunt wire, Koford X12 .518" armature, Cahoza screws, professionaly assembled, absolutely the most precise and the fastest among all motors, weight 19,1 grammes
ea182.80
237-ULG12 MOTOR TYPE UL -- GOLD
Cahoza C-can motor, features new Cahoza C-can #252, Cahoza Tornado 5 magnets, Cahoza endbell #263, Cahoza spring cups, ball bearings both in can and endbell, best Koford brushes, 3 coil teflon insulated springs, silver shunt wire, Koford X12 .518" armature, Cahoza screws, professionaly assembled, absolutely the most precise and the fastest among all motors, weight 19 grammes
ea187.80
238-OPROFI G12 MOTOR TYPE O
Cahoza C-can motor, features new Cahoza C-can #250, Cahoza Tornado 5 magnets, Cahoza aluminium endbell #146, Cahoza spring cups, ball bearings both in can and endbell, best Koford brushes, 3 coil teflon insulated springs, silver shunt wire, Koford X12 .518" armature, Cahoza screws, professionaly assembled, absolutely the most precise and the fastest among all motors, weight 19 grammes
ea198.80
238-UPROFI G12 MOTOR TYPE U
Cahoza C-can motor, features new Cahoza C-can #251, Cahoza Tornado 5 magnets, Cahoza endbell #146, Cahoza spring cups, ball bearings both in can and endbell, best Koford brushes, 3 coil teflon insulated springs, silver shunt wire, Koford X12 .518" armature, Cahoza screws, professionaly assembled, absolutely the most precise and the fastest among all motors, weight 18,9 grammes
ea201.80
238-ULPROFI G12 MOTOR TYPE UL
Cahoza C-can motor, features new Cahoza C-can #252, Cahoza Tornado 5 magnets, Cahoza endbell #146, Cahoza spring cups, ball bearings both in can and endbell, best Koford brushes, 3 coil teflon insulated springs, silver shunt wire, Koford X12 .518" armature, Cahoza screws, professionaly assembled, absolutely the most precise and the fastest among all motors, weight 18,8 grammes
ea206.80




G12 SETUPS - TOP BLUEPRINTED
codedescriptionpackingUSD
241-OG12 SETUP TYPE O
Cahoza C-can motor, features new Cahoza C-can #250, Cahoza Tornado 5 magnets, Cahoza endbell #262, Cahoza spring cups, 2x5 precisely turned oilites, Cahoza screws, professionaly assembled, for .518" armatures, Koford ones are recommended, weight 11,1 grammes
ea87.40
241-UG12 SETUP TYPE U
Cahoza C-can motor, features new Cahoza C-can #251, Cahoza Tornado 5 magnets, Cahoza endbell #262, Cahoza spring cups, 2x5 precisely turned oilites, Cahoza screws, professionaly assembled, for .518" armatures, Koford ones are recommended, weight 11 grammes
ea90.40
242-OG12 SETUP TYPE O
Cahoza C-can motor, features new Cahoza C-can #250, Cahoza Tornado 5 magnets, Cahoza endbell #262, Cahoza spring cups, 2x5 precisely turned oilite in endbell, ball bearing in can, Cahoza screws, professionaly assembled, for .518" armatures, Koford ones are recommended, weight 11,1 grammes
ea99.40
242-UG12 SETUP TYPE U
Cahoza C-can motor, features new Cahoza C-can #251, Cahoza Tornado 5 magnets, Cahoza endbell #262, Cahoza spring cups, 2x5 precisely turned oilite in endbell, ball bearing in can, Cahoza screws, professionaly assembled, for .518" armatures, Koford ones are recommended, weight 11 grammes
ea102.40
242-ULG12 SETUP TYPE UL
Cahoza C-can motor, features new Cahoza C-can #252, Cahoza Tornado 5 magnets, Cahoza endbell #262, Cahoza spring cups, 2x5 precisely turned oilite in endbell, ball bearing in can, Cahoza screws, professionaly assembled, for .518" armatures, Koford ones are recommended, weight 10,9 grammes
ea107.40
243-OG12 SETUP TYPE O -- GOLD
Cahoza C-can motor, features new Cahoza C-can #250, Cahoza Tornado 5 magnets, Cahoza endbell #263, Cahoza spring cups, ball bearing both in can and endbell, Cahoza screws, professionaly assembled, for .518" armatures, Koford ones are recommended, weight 11,1 grammes
ea122.60
243-UG12 SETUP TYPE U -- GOLD
Cahoza C-can motor, features new Cahoza C-can #251, Cahoza Tornado 5 magnets, Cahoza endbell #263, Cahoza spring cups, ball bearing both in can and endbell, Cahoza screws, professionaly assembled, for .518" armatures, Koford ones are recommended, weight 11 grammes
ea125.60
243-ULG12 SETUP TYPE UL -- GOLD
Cahoza C-can motor, features new Cahoza C-can #252, Cahoza Tornado 5 magnets, Cahoza endbell #263, Cahoza spring cups, ball bearing both in can and endbell, Cahoza screws, professionaly assembled, for .518" armatures, Koford ones are recommended, weight 10,9 grammes
ea130.60
244-OPROFI G12 SETUP TYPE O
Cahoza C-can setup, features new Cahoza C-can #250, Cahoza Tornado 5 magnets, Cahoza aluminium endbell #146, Cahoza spring cups, ball bearing both in can and endbell, Cahoza screws, professionaly assembled, for .518" armatures, Koford ones are recommended, weight 10,9 grammes
ea139.60
244-UPROFI G12 SETUP TYPE U
Cahoza C-can setup, features new Cahoza C-can #251, Cahoza Tornado 5 magnets, Cahoza aluminium endbell #146, Cahoza spring cups, ball bearing both in can and endbell, Cahoza screws, professionaly assembled, for .518" armatures, Koford ones are recommended, weight 10,8 grammes
ea142.60
244-ULPROFI G12 SETUP TYPE UL
Cahoza C-can setup, features new Cahoza C-can #252, Cahoza Tornado 5 magnets, Cahoza aluminium endbell #146, Cahoza spring cups, ball bearing both in can and endbell, Cahoza screws, professionaly assembled, for .518" armatures, Koford ones are recommended, weight 10,7 grammes
ea147.60




MOTOR AND ENDBELL PARTS FOR G12 MOTORS
codedescriptionpackingUSD
250C-CAN TYPE O
Cahoza C-can, produced from 0,4mm (.0157") thick hardmetal plate, the whole unrolled shape of can is made by EDM, then it is bend on precise hand tooling to the final shape, on sides weld by pulse laser, then holes for screws and oilites are drilled using precise templates, can is made by hand so that perfect accuracy is conserved, outside diameter is 21,25mm (.836"), can is plated by high quality shiny nickel, all the sizes are in 0,03mm (.00118") tolerance, this can is very tough although it weighs only 2,32 grammes
ea30.00
251C-CAN TYPE U
Cahoza C-can, produced from 0,4mm (.0157") thick hardmetal plate, the whole unrolled shape of can is made by EDM, then it is bend on precise hand tooling to the final shape, on sides weld by pulse laser, then holes for screws and oilites are drilled using precise templates, can is made by hand so that perfect accuracy is conserved, outside diameter is 21,25mm (.836"), can is plated by high quality shiny nickel, all the sizes are in 0,03mm (.00118") tolerance, this can is very tough although it weighs only 2,22 grammes
ea32.00
252C-CAN TYPE UL
Cahoza C-can, produced from 0,4mm (.0157") thick hardmetal plate, the whole unrolled shape of can is made by EDM, then it is bend on precise hand tooling to the final shape, on sides weld by pulse laser, then holes for screws and oilites are drilled using precise templates, can is made by hand so that perfect accuracy is conserved, outside diameter is 21,25mm (.836"), can is plated by high quality shiny nickel, all the sizes are in 0,03mm (.00118") tolerance, this can is very tough although it weighs only 2,10 grammes
ea39.00
2543 COIL SPRINGS
Cahoza springs for G12, Cobalt 12, INT15 motors, made from stainless steel, resists up to 800F, these springs have got the same tension as Red Champion, but the quality and workout is far more professional, packaged 10 pairs per bag
bag26.00
2553 COIL STEEL SPRINGS
Cahoza springs for G12, Cobalt 12, INT15, G27 motors and G7 qualification motors, made from hardened steel coated with white shiny zinc, withstands 800F, these springs have got 8% more tension than the stainless steel springs, packaged 10 pairs per bag
bag28.00
257NEW LIGHT PROFI ENDBELLS
new polymer light profi endbells for Cahoza C-can, available in 4 colors, weight only 0,7 grammes
ea5.00
257ANEW LIGHT PROFI ENDBELLS PACK
new polymer light profi endbells for Cahoza C-can, available in 4 colors, weight only 0,7 grammes, packaged 6 pieces a bag
bag30.00
262ASSEMBLED ENDBELL FOR C-CANS
completely assembled endbell for C-cans, includes oilite bearing, aluminium brush hoods #266, professional work out, weighs 2 grammes
ea21.00
263NEW PROFI TOP ASSEMBLED ENDBELL
completely assembled endbell for C-cans, includes ball bearing, professional work out, anodised spring posts, weight 2 grammes, new top professional brush hoods #268
ea47.00
266ALUMINIUM NICKEL PLATED BRUSH HOODS
hardware (brush hoods), made from hard aluminium plate with thickness of 0.4mm (.0157"), nickel plated, hand work, most precise, no more grinding or drilling, when fitted onto an endbell perfectly ensure that brushes are precisely centered to the armature axis and also brush clearance is the smallest possible in these hardware, these hoods are compatible with Pro Slot #711 plastic endbells, weigh only 0,4 grammes, these brush hoods are perfect in dissipating heat away, packaged 6 pairs per bag
bag40.00
268NEW PROFESSIONAL ALUMINIUM GOLD PLATED BRUSH HOODS
total new professional hardware (brush hoods) with heatsinks, made from hard aluminium plate with thickness of 0.4mm (.0157"), gold plated, hand work, most precise, no more grinding or drilling, when fitted onto an endbell perfectly ensure that brushes are precisely centered to the armature axis and also brush clearance is the smallest possible in these hardware, weigh only 0,6 grammes, these brush hoods dissipates 50% more heat away than #266 or #267, packaged 6 pairs per bag
bag120.00
270ALUMINIUM SPRING POSTS
diameter for springs is 3,55mm (.180"), length is 2mm, springs are perfectly fastened and do not loose at all, packed 10 pairs per bag
bag15.00
273PROFI TAPPING SCREWS
Cahoza profi tapping screws, thread diameter is 1,52mm (.0598"), length thread is 4 mm (.157"), bolt head high is 1,2mm (.047"), for T5 driver or imbus Tip .051", screws are black coated, packed 24 pcs per bag
bag18.00




G12 CERAMIC MAGNETS
codedescriptionpackingUSD
275NEW CAHOZA TORNADO 2 MAGNETS
these magnets are produced from special Japanese material, they are manufactured using anisotropic technology and after zapping the magnetic lines are radially oriented, height 14,15mm (.555"), length 11,5mm (.453"), thickness 3,85mm (.152"), weight 6,58 grammes, Tornado 2 magnets are marked with white dot, magnets are legal for USRA and ISRA
pair17.00
276NEW CAHOZA TORNADO 2 BEVELLED MAGNETS
the same as #275 magnets, but feature 16-degree cut, weight 5,96 grammes, these magnets are legal for USRA and ISRA
pair22.00
277CAHOZA TORNADO 5 MAGNETS
these popular magnets are identical as #275 (Tornado 2 magnets) but specially recharged, selected for maximum strength and matched, weight 6,58 grammes, Tornado 5 magnets are marked with yellow dot, magnets are legal for USRA and ISRA
pair27.00
278NEW CAHOZA TORNADO 5 BEVELLED MAGNETS
the same as #277 magnets, but feature 16-degree cut, weight 5,96 grammes, these magnets are legal for USRA and ISRA
pair32.60




PARTS FOR BODIES
codedescriptionpackingUSD
299BRASS BODY PIN STARS
hard brass body pin stars, design by Cahoza, thickness 0,17mm (.00708"), very precise, packaged 24 per bag
bag5.80




CAHOZA WEAR
codedescriptionpackingUSD
310CAHOZA T-SHIRT -- FRESH IDEAS
100% pure cotton, available in black or purple, available in XXL, always specify color when ordering
ea24.00
312CAHOZA T-SHIRT -- MY BEST!
100% pure cotton, available in black, available in XL or XXL, always specify size when ordering
ea24.00