| description | # | QTY | USD |
|---|---|---|---|
| POLYMER GEARS 80 PITCH ELITE 3/32 AXLE polymer gears 80 pitch, for 3/32" axle, only selected ones, high quality and accuracy, for demanding racers, tested on our roll tester, available in 44, 45 teeth | 1 | ea | 5.20 |
| HIGHLY DURABLE GEARS 80 PITCH GLUED TO AXLE 3/32 gears 45T glued to axle #23, hub diameter milled down to 3,7mm (.145"), ideal for Eurosport 24 | 1-AG | ea | 17.00 |
| HIGHLY DURABLE GEARS 80 PITCH highly durable polymer gears 80 pitch, for 3/32" axle, only selected ones, high quality and accuracy, for demanding racers, tested on our roll tester, crash resistant, available in 44, 45 teeth | 1-B | ea | 6.40 |
| HIGHLY DURABLE GEARS 80 PITCH GLUED TO AXLE 2MM gears 44T glued to axle #24, hub diameter milled down to 3,7mm (.145"), total width of hub milled down to 3,8mm (.149"), ideal for Sport32 | 2-AG | ea | 19.00 |
| HIGHLY DURABLE GEARS 80 PITCH 2MM AXLE highly durable polymer gears 80 pitch, for 2mm axle, only selected ones, high quality and accuracy, for demanding racers, tested on our roll tester, crash resistant, available in 44 teeth | 2-B | ea | 6.40 |
| POLYMER GEARS 72 PITCH ANGLED 2° polymer gears 72 pitch, for 3/32" axle, 42, 43, 44 teeth angled by 2°, especially shaped teeth works perfectly with any pinion, tested on US NATS in 2002 and won in nearly all categories | 3 | ea | 5.40 |
| HIGHLY DURABLE GEARS 72 PITCH ANGLED 2° highly durable polymer gears 72 pitch, for 3/32" axle, only selected ones, high quality and accuracy, for demanding racers, tested on our roll tester, crash resistant, available in 42, 43 teeth, angled by 2° | 3-B | ea | 6.40 |
| POLYMER GEARS 72 PITCH ANGLED 16° polymer gears 72 pitch, for 3/32" axle, 41, 42, 43, 44 teeth angled by 16°, especially shaped teeth works perfectly with any pinion | 4 | ea | 5.40 |
| HIGHLY DURABLE GEARS 72 PITCH ANGLED 16° highly durable polymer gears 72 pitch, for 3/32" axle, only selected ones, high quality and accuracy, for demanding racers, tested on our roll tester, crash resistant, available in 41T, 42T, 43T and 44T, angled by 16° | 4-B | ea | 6.40 |
| POLYMER GEARS 72 PITCH STRAIGHT ELITE polymer gears 72 pitch, for 3/32" axle, but only selected ones, high quality and accuracy, for demanding racers, tested on our roll tester, available in 40, 41 teeth, gears perfect for Eurosport 24 | 5 | ea | 5.20 |
| HIGHLY DURABLE GEARS 72 PITCH GLUED TO AXLE 3/32 gears 38T corrected, 39T, 40T, 41T glued to axle #23, hub diameter milled down to 3,7mm (.145"), ideal for Eurosport 24 | 5-AG | ea | 17.00 |
| HIGHLY DURABLE GEARS 72 PITCH GLUED TO AXLE 2MM gears 38T corrected, 39T and 40 glued to axle 2mm, hub diameter milled down to 3,7mm (.145"), total width of hub milled down to 3,8mm (.149"), ideal for Sport 32 | 5-AG-2 | ea | 19.00 |
| HIGHLY DURABLE GEARS 72 PITCH highly durable polymer gears 72 pitch, for 3/32" axle, only selected ones, high quality and accuracy, for demanding racers, tested on our roll tester, crash resistant, available in 38T, 39T, 40T, 41T | 5-B | ea | 6.40 |
| HIGHLY DURABLE GEARS 72 PITCH FOR 2MM AXLE highly durable polymer gears 72 pitch, for 2mm axle, only selected ones, high quality and accuracy, for demanding racers, tested on our roll tester, crash resistant, available in 38, 39 and 40 teeth | 5-B-2 | ea | 6.40 |
| HIGHLY DURABLE GEARS 72 PITCH highly durable polymer gears 72 pitch, for 3/32" axle, only selected ones, high quality and accuracy, for demanding racers, tested on our roll tester, crash resistant, tooth shape corrected so this gear has the same diameter as 39T, available in 38 teeth | 5-BC | ea | 6.40 |
| HIGHLY DURABLE GEARS 72 PITCH FOR 2MM AXLE highly durable polymer gears 72 pitch, for 2mm axle, only selected ones, high quality and accuracy, for demanding racers, tested on our roll tester, crash resistant, tooth shape corrected so this gear has the same diameter as 39T, available in 38 teeth | 5-BC-2 | ea | 6.40 |
| POLYMER GEARS 64 PITCH ELITE polymer gears 64 pitch, for 3/32" axle, but only selected ones, high quality and accuracy, for demanding racers, tested on our roll tester, available in 35, 36, 37, 38, 39 teeth | 6 | ea | 5.20 |
| HIGHLY DURABLE GEARS 64 PITCH GLUED TO AXLE 3/32 gears 64 pitch 35T, 36T glued to axle #23, hub diameter milled down to 3,7mm (.145") | 6-AG | ea | 17.00 |
| HIGHLY DURABLE GEARS 64 PITCH highly durable polymer gears 64 pitch, for 3/32" axle, only selected ones, high quality and accuracy, for demanding racers, tested on our roll tester, crash resistant, available in 35, 36 teeth | 6-B | ea | 6.40 |
| HIGHLY DURABLE GEARS 64 PITCH highly durable polymer gears 64 pitch, 37T, 38T, 39T, for 3/32" axle, only selected ones, high quality and accuracy, for demanding racers, tested on our roll tester, crash resistant | 8 | ea | 6.40 |
| DRILLED HIGHLY DURABLE GEARS highly durable gears on small hub for 3/32" axle, gears are drilled, available in 72 pitch (38T corrected, 39T, 40T) and in 80 pitch (45T) | 9 | ea | 7.80 |
| NEW DRILLED HIGHLY DURABLE GEARS FOR 2MM AXLE highly durable gears on small hub for 2mm axle, gears are drilled, available in 72 pitch 39T and 40T | 10 | ea | 7.80 |
| POLYMER GEARS 64 PITCH ANGLED 16° polymer gears 64 pitch, for 3/32" axle, angled 16°, selected ones, high quality and accuracy, for demanding racers, tested on our roll tester, available in 37, 38, 39 teeth | 11 | ea | 5.40 |
| POLYMER GEARS 64 PITCH ANGLED 15° polymer gears 64 pitch, for 3/32" axle, angled 15°, selected ones, high quality and accuracy, for demanding racers, tested on our roll tester, available in 36 teeth | 11-S | ea | 5.40 |
| description | # | QTY | USD |
|---|---|---|---|
| EDM PINIONS 64 PITCH EDM pinions 64 pitch 7T - 2mm hole, plated with special black cover especially developed for Cahoza, this cover enhances lubricity 8 times and repels solder so teeth cannot be soldered through, after application the pinion hole is firmly cut to exact size and solder then sticks perfectly in, made from stainless steel 45 HRc, suitable for all types of gears, ideal for Cahoza 64 pitch gears | 12 | ea | 28.60 |
| EDM PINIONS 80 PITCH EDM pinions 80 pitch 6T - 1,5mm hole, very accurate, plated with special black cover especially developed for Cahoza, this cover enhances lubricity 8 times and repels solder so teeth cannot be soldered through, after application the pinion hole is firmly cut to exact size and solder then sticks perfectly in, made from stainless steel 45 HRc, suitable for all types of gears, ideal for Cahoza 80 pitch gears | 13 | ea | 28.60 |
| EDM PINIONS 80 PITCH EDM pinions 80 pitch 6T - 1,2mm hole, very accurate, plated with special black cover especially developed for Cahoza, this cover enhances lubricity 8 times and repels solder so teeth cannot be soldered through, after application the pinion hole is firmly cut to exact size and solder then sticks perfectly in, made from stainless steel 45 HRc, suitable for all types of gears, ideal for Cahoza 80 pitch gears | 13-A | ea | 31.20 |
| EDM PINIONS 72 PITCH EDM pinions 72 pitch 6T - 1,5mm hole, very accurate, plated with special black cover especially developed for Cahoza, this cover enhances lubricity 8 times and repels solder so teeth cannot be soldered through, after application the pinion hole is firmly cut to exact size and solder then sticks perfectly in, made from stainless steel 45 HRc, suitable for all types of gears, ideal for Cahoza 72 pitch gears | 14 | ea | 28.60 |
| EDM PINIONS 72 PITCH EDM pinions 72 pitch 6T - 1,2mm hole, very accurate, plated with special black cover especially developed for Cahoza, this cover enhances lubricity 8 times and repels solder so teeth cannot be soldered through, after application the pinion hole is firmly cut to exact size and solder then sticks perfectly in, made from stainless steel 45 HRc, suitable for all types of gears, ideal for Cahoza 72 pitch gears | 14-A | ea | 31.20 |
| EDM PINIONS 72 PITCH EDM pinions 72 pitch 7T - 2mm hole, very accurate, plated with special black cover especially developed for Cahoza, this cover enhances lubricity 8 times and repels solder so teeth cannot be soldered through, after application the pinion hole is firmly cut to exact size and solder then sticks perfectly in, made from stainless steel 45 HRc, suitable for all types of gears, ideal for Cahoza 72 pitch gears | 15 | ea | 28.60 |
| EDM PINIONS 64 PITCH EDM pinions 64 pitch 6T - 2mm hole, plated with special black cover especially developed for Cahoza, this cover enhances lubricity 8 times and repels solder so teeth cannot be soldered through, after application the pinion hole is firmly cut to exact size and solder then sticks perfectly in, made from stainless steel 45 HRc, suitable for all types of gears, ideal for Cahoza 64 pitch gears | 16 | ea | 28.60 |
| EDM PINIONS 72 PITCH EDM pinions 72 pitch 5T - 1,5mm hole, very accurate, plated with special black cover especially developed for Cahoza, this cover enhances lubricity 8 times and repels solder so teeth cannot be soldered through, after application the pinion hole is firmly cut to exact size and solder then sticks perfectly in, made from stainless steel 45 HRc, suitable for all types of gears, ideal for Cahoza 72 pitch gears | 17 | ea | 28.60 |
| EDM PINIONS 72 PITCH EDM pinions 72 pitch 5T - 1,2mm hole, very accurate, plated with special black cover especially developed for Cahoza, this cover enhances lubricity 8 times and repels solder so teeth cannot be soldered through, after application the pinion hole is firmly cut to exact size and solder then sticks perfectly in, made from stainless steel 45 HRc, suitable for all types of gears, ideal for Cahoza 72 pitch gears | 17-A | ea | 31.20 |
| EDM PINIONS 64 PITCH EDM pinions 64 pitch 5T - 1,2mm hole, very accurate, plated with special black cover especially developed for Cahoza, this cover enhances lubricity 8 times and repels solder so teeth cannot be soldered through, after application the pinion hole is firmly cut to exact size and solder then sticks perfectly in, made from stainless steel 45 HRc, suitable for all types of gears, ideal for Cahoza 64 pitch gears | 18 | ea | 31.20 |
| description | # | QTY | USD |
|---|---|---|---|
| TOUGH EPOXY Cahoza high temperature epoxy, single component oven cure adhesive, grey color, cure procedure is 80°C(176F) for 5min, 100°C(212F) for 5min, 120°C(248F) for 5min,140°C(284F) for 5min and finish at 160°C(320F) for 30 min, resists up to 200°C(392F), the advantage is that it perfectly adheres to every material, you can glue ceramic magnets, hardware to aluminium endbells, ball bearings to aluminium endbellls, gears to axles, packed in tubs by 10ml. Need to be stored in the fridge from 2°C (36F) to 8°C (46F). | 22 | ea | 7.80 |
| SOLID AXLE 3/32 solid 3/32" axle, highly durable 60HRc, axle is very fine grinded and polished, the 3/32" diameter is very accurate with maximum deflection of 0,001 mm (.00004"), great straightness along the entire length, it is crooked to max. 0,01 mm (.0004") throughout the entire length, ends are also grinded, exact diameter of this axle is 2,371 mm (.093346"), the best axle ever available for profi racing | 23 | ea | 6.00 |
| HOLLOW AXLE 3/32 the axle is drilled by EDM, hole diameter is 1.5mm (.06"), axle is very accurate, although the axle is lightened it is still strong | 23-H | ea | 26.40 |
| SOLID AXLE 2MM solid 2mm axle, highly durable 60HRc, axle is very fine grinded and polished, the 2mm diameter is very accurate with maximum deflection of 0,001 mm (.00004"), great straightness along the entire length, it is crooked to max. 0,01 mm (.0004") throughout the entire length, ends are also grinded, exact diameter of this axle is 1,992mm (.07838"), lenght is 51mm (2") the best axle ever available for Scale racing | 24 | ea | 6.80 |
| HOLLOW AXLE 2MM the axle is drilled by EDM, hole diameter is 1.0mm (.04"), axle is very accurate, although the axle is lightened it is still strong | 24-H | ea | 18.20 |
| description | # | QTY | USD |
|---|---|---|---|
| GRAPHITE GUIDE graphite guide is innovated copy of the Starburst guide, there is no chance of cutting the guide tongue into the braid holder, content: nylon, glass fibre, graphite | 25 | ea | 1.20 |
| CUT DOWN NYLON ELASTIC GUIDE cut down guide for integral guide tongue chassis, content: blue nylon, glass fibre, these guides have minimum content of glass fibre for higher elasticity, ideal for Production chassis | 26 | ea | 1.20 |
| CUT DOWN NYLON ELASTIC GUIDE - THREADED cut down guide for integral guide tongue chassis, content: blue nylon, glass fibre, these guides have minimum content of glass fibre for higher elasticity, ideal for Production chassis -- threaded | 26-T | ea | 1.60 |
| CUT DOWN NYLON GUIDE cut down guide for integral guide tongue chassis, content: violet nylon, glass fibre, these guides have higher content of glass fibre, they are more tough, ideal for Production chassis and other groups | 27 | ea | 1.20 |
| CUT DOWN NYLON GUIDE - THREADED cut down guide for integral guide tongue chassis, content: violet nylon, glass fibre, these guides have higher content of glass fibre, they are more tough, ideal for Production chassis and other groups -- threaded | 27-T | ea | 1.60 |
| CUT DOWN GRAPHITE NYLON GUIDE cut down guide for integral guide tongue chassis, content: nylon, glass fibre, graphite | 28 | ea | 1.20 |
| CUT DOWN GRAPHITE NYLON GUIDE - THREADED cut down guide for integral guide tongue chassis, content: nylon, glass fibre, graphite -- threaded | 28-T | ea | 1.60 |
| GUIDE CLIPS SHORT guide clips for all types of guides, manufactured from tough brass plate, thickness 0,3mm (.0118"), lead wires are soldered through windows in guide, packaged 10 pairs per bag | 29 | bag | 15.20 |
| GUIDE CLIPS LONG guide clips for all types of guides, manufactured from tough brass plate, thickness 0,3mm (.0118"), lead wires are soldered onto the top side of the clip, packaged 10 pairs per bag | 30 | bag | 16.20 |
| GUIDE NUTS 9MM aluminium guide nuts, made on a CNC machine, including the hexagon shape, size is 9mm (.354"), packaged 10 pcs per bag | 31 | bag | 16.60 |
| ANODISED GUIDE NUTS 9MM anodised aluminium guide nuts, made on a CNC machine, including the hexagon shape, size is 9mm (.354"), available in blue or red color, packaged 10 pcs per bag | 31-A | bag | 26.40 |
| ELASTIC AND TOUGH GUIDE - THREADED elastic and tough guide is innovated copy of the Starburst guide, there is no chance of cutting the guide tongue into the braid holder, content: black nylon, glass fibre -- threaded | 32-T | ea | 1.60 |
| GUIDE CLIPS SHORT these clips perfectly fit long guide, manufactured from tough brass plate, thickness 0,25mm (.01"), lead wires are soldered through windows in guide, packaged 10 pairs per bag | 333 | bag | 15.20 |
| 18 GAUGE LEADWIRE - RED (5FT) 18 gauge wire, bare copper conductor, red silicon insulation, 408 strands, 5 feet | 334 | ea | 5.80 |
| LONG CUT DOWN NYLON ELASTIC GUIDE long cut down guide for integral guide tongue chassis, lenght 26.8 mm, special shape of keel (see picture), content: blue nylon, glass fibre, these guides have minimum content of glass fibre for higher elasticity, very precise, high quality material used | 335 | ea | 4.60 |
| LONG CUT DOWN NYLON GUIDE long cut down guide for integral guide tongue chassis, lenght 26.8 mm, special shape of keel (see picture), content: violet nylon, glass fibre, these guides have higher content of glass fibre, they are more tough, very precise, high quality material used | 336 | ea | 4.60 |
| LONG CUT DOWN NYLON ELASTIC GUIDE upgraded version of long cut down guide (#335) for integral guide tongue chassis, lenght 26.8 mm, straight keel (see picture), content: blue nylon, glass fibre, these guides have minimum content of glass fibre for higher elasticity, very precise, high quality material used | 338 | ea | 5.00 |
| LONG CUT DOWN NYLON GUIDE upgraded version of long cut down guide (#336) for integral guide tongue chassis, lenght 26.8 mm, straight keel (see picture), content: violet nylon, glass fibre, these guides have higher content of glass fibre, they are more tough, very precise, high quality material used | 339 | ea | 5.00 |
| LIGHT BRAIDS these braids size is 4.5 x 0.6 x 30 mm, 408 strands, made from very pure copper (99.9 %), these braids are ideal for PR24, ES24, SP32 and F1/32, they will last longer, the production process is finalized by Cahoza (handmade), packed 50 pairs per bag | 340 | bag | 125.00 |
| MEDIUM BRAIDS these braids size is 4.8 x 0.7 x 30 mm, 552 strands, made from very pure copper (99.9 %), these braids are ideal for PR24 and ES24, they will last longer, the production process is finalized by Cahoza (handmade), packed 50 pairs per bag | 341 | bag | 125.00 |
| HEAVY BRAIDS these braids size is 5.0 x 0.8 x 30 mm, 624 strands, made from very pure copper (99.9 %), these braids are ideal for wing cars, they will last longer, the production process is finalized by Cahoza (handmade), packed 50 pairs per bag | 342 | bag | 125.00 |
| LIGHT BRAIDS these braids size is 4.5 x 0.6 x 30 mm, 408 strands, made from very pure copper (99.9 %), these braids are ideal for PR24, ES24, SP32 and F1/32, they will last longer, the production process is finalized by Cahoza (handmade), packed 10 pairs per bag | 343 | bag | 26.00 |
| MEDIUM BRAIDS these braids size is 4.8 x 0.7 x 30 mm, 552 strands, made from very pure copper (99.9 %), these braids are ideal for PR24 and ES24, they will last longer, the production process is finalized by Cahoza (handmade), packed 10 pairs per bag | 344 | bag | 26.00 |
| HEAVY BRAIDS these braids size is 5.0 x 0.8 x 30 mm, 624 strands, made from very pure copper (99.9 %), these braids are ideal for wing cars, they will last longer, the production process is finalized by Cahoza (handmade), packed 10 pairs per bag | 345 | bag | 26.00 |
| description | # | QTY | USD |
|---|---|---|---|
| PHOSPHOR BRONZE SPACERS 3/32 phosphor bronze axle spacers, 0,25mm (.01"), very hard but will not stick to magnets, packaged 24 per bag | 35PB | bag | 6.00 |
| PHOSPHOR BRONZE SPACERS 0,1 phosphor bronze spacers, thickness 0,1 mm (.004"), ultra precision fit on armature shaft to eliminate vibration due to loose fit, phosphor bronze is very hard, but will not stick to magnets, packaged 24 per bag | 36 | bag | 5.60 |
| PHOSPHOR BRONZE SPACERS 0,18 the same as #36, but thickness is 0,18mm (.007"), packaged 24 per bag | 37 | bag | 5.80 |
| PHOSPHOR BRONZE SPACERS 0,3 the same as #36, but thickness is 0,3mm (.0118"), packaged 24 per bag | 38 | bag | 6.00 |
| description | # | QTY | USD |
|---|---|---|---|
| FRONT WHEELS super light front wheels, spoked and made from black rubber, mount on a straight pin or on a piano wire, diameter 13mm (.511"), thickness 0,8mm (.0314"), axle bore diameter 1mm (.039"), packaged by 10 pairs | 40 | bag | 9.80 |
| FIBRE CARBON PLASTIC RIMS Cahoza plastic eurorims, for 3/32" axles, diameter 11mm (.433"), width 20mm (.787"), these rims are very precise and rotational accuracy is 0.07mm (.0027") at maximum, thickness of side at hub is 0.8mm (.031), weight of one pair is 1.7grammes | 41 | pair | 6.80 |
| FIBRE CARBON PLASTIC RIMS - LIGHTENED ligtened version of #41, hub with drilled holes, inside diameter of rim is turned so the rotational accuracy is improved, weight of one pair is 1.49 grammes | 41-L | pair | 12.00 |
| FIBRE CARBON PLASTIC RIMS FOR 2MM AXLE - LIGHTENED ligtened version of #43, hub with drilled holes, inside diameter of rim is turned so the rotational accuracy is improved, weight of one pair is 1.30 grammes | 43-L | pair | 11.00 |
| description | # | QTY | USD |
|---|---|---|---|
| SILVER SOLDER high temperature silver solder with perfect flux core (non corrosive flux), this solder is 94.8% tin and 5.2% silver, diameter 1mm, lenght 6 feet (1,8m) | 44 | ea | 6.00 |
| description | # | QTY | USD |
|---|---|---|---|
| MOTOR BALL BEARING -- OPEN standard can and endbell open ball bearing, made from stainless steeel, has extra low play for better motor performance and high speed retainer for long life and the minimum possible vibration, size is 2x5mm, width 1,5mm, Japan top quality bearings | 45 | ea | 3.00 |
| MOTOR BALL BEARING -- SHIELDED standard can and endbell shielded ball bearing, made from stainless steeel, has extra low play for better motor performance and high speed retainer for long life and the minimum possible vibration, size is 2x5mm, width 2,3mm, Japan top quality bearings | 46 | ea | 9.30 |
| MOTOR BALL BEARING -- SHIELDED & FLANGED standard can and endbell shielded & flanged ball bearing, made from stainless steeel, has extra low play for better motor performance and high speed retainer for long life and the minimum possible vibration, size is 2x5mm, width 2,3mm | 47 | ea | 10.20 |
| 3/32 axle 3/32" shielded & flanged ball bearing, made from stainless steel, has extra low play for better performance and high speed retainer for long life and the minimum possible vibration, width 2,4mm, these bearings have lower friction and are suitable for higher speeds, Japan top quality bearings | 48 | pair | 24.20 |
| GRW MOTOR BALL BEARING - SHIELDED & FLANGED precise shielded and flanged GRW ball bearing, made from stainless steeel, has extra low play for better motor performance and high speed retainer for long life and the minimum possible vibration, size is 2x5mm, width 2,3mm, German quality ball bearings, these ball bearings are being tested in Germany by manufacturer, only selected pieces with top quality are choosen | 50 | ea | 14.70 |
| description | # | QTY | USD |
|---|---|---|---|
| KNURLED GRIP knurled grip for 2mm axle, imbus screw included | 64 | ea | 4.60 |
| DIAMOND COATED BRUSH RADIUS TOOL diamond coated brush radius tool, diameter 5.3 mm (.208"), includes knurled grip | 65 | ea | 42.00 |
| ALUMINIUM WRENCH super light anodised aluminium wrench, tip 0.050" gold covered, comes in red and graphite colours | 66 | ea | 29.00 |
| DIAMOND CUTTING TOOL CAHOZA stocks a super diamond cutting tool for turning commutators. With these you get very easy right next to commutator cap and you can turn any commutator with it. The angle of a tip is only 20°, and side clearance angle is 10°, tip has nose radius of R0.12 mm. These cutting tools were made in Switzerland from the finest diamond and are ground on machines like real diamonds. Cutting tools are perfect, working free of burrs and it is really 100% quality. | 67 | ea | 215.00 |
| CAHOZA MAGNET GLUING TOOL - DIA .531 stainless steel slug with smooth finish (CNC machined) with knurled aluminium nut. Used for precise gluing of not honed Tornado magnets into Cahoza C-cans. Diameter .531" (13.48 mm). | 68-531 | ea | 18.80 |
| CAHOZA MAGNET GLUING TOOL - DIA .538 stainless steel slug with smooth finish (CNC machined) with knurled aluminium nut. Used for regluing of Tornado magnets into Cahoza C-cans. Diameter .538" (13.66 mm). | 68-538 | ea | 18.80 |
| CAHOZA MAGNET GLUING TOOL - DIA .539 stainless steel slug with smooth finish (CNC machined) with knurled aluminium nut. Used for regluing of Tornado magnets into Cahoza C-cans. Diameter .539" (13.70 mm). | 68-539 | ea | 18.80 |
| description | # | QTY | USD |
|---|---|---|---|
| FULL COVERAGE CAN DIA .630 LIGHT AVAILABLE JUST AS KIT #82, full coverage can for G27 racing, magnet height 10,7mm (.421"), total length 16,8mm (.661"), inside diameter for magnets 16,1mm (.634"), outside diameter grinded to 17mm (.669"), diameter for endbell is 16mm (.630") | 80 | ea | 0.00 |
| SETUP KIT - G27 LIGHT .630 This kit contains can #80, single endbell #128 or #128-4, pair of gold plated horizontal hardware #171, pair of 5 coil anodized spring cups #157 and 4 pieces of phenolic insulators #159 | 82 | ea | 80.00 |
| description | # | QTY | USD |
|---|
| description | # | QTY | USD |
|---|---|---|---|
| SINGLE ENDBELL FOR G12 CANS aluminium hard anodised single endbell for G12 Cahoza C-cans, lightened, pattern hole drilled for hardware #170 and #171, these endbells are manufactured for shielded ball bearings 2,3mm (.090") wide | 126 | ea | 48.00 |
| SINGLE ENDBELL FOR G12 CANS +4° ROTATION aluminium hard anodised single endbell for G12 Cahoza C-cans, lightened, pattern hole drilled for hardware #170 and #171 and turned to +4°, these endbells are manufactured for shielded ball bearings 2,3mm (.090") wide | 126-4 | ea | 48.00 |
| SINGLE ENDBELL TALLER .610 aluminium hard anodised single endbell for Koford G7 cans, lightened, longer endbell tower, better dissipates heat away, for arms with commutator caps, pattern hole drilled for vertical hardware, diameter for cans is 15,5mm (.610"), these endbells are manufactured for shielded ball bearings 2,3mm (.090") wide | 127 | ea | 22.00 |
| SINGLE ENDBELL TALLER .610 +4° ROTATION aluminium hard anodised single endbell for Koford G7 cans, lightened, longer endbell tower, better dissipates heat away, for arms with commutator caps, pattern hole drilled for vertical hardware and turned to +4°, diameter for cans is 15,5mm (.610"), these endbells are manufactured for shielded ball bearings 2,3mm (.090") wide | 127-4 | ea | 22.00 |
| SINGLE ENDBELL TALLER .630 FOR G27 CAHOZA CAN aluminium hard anodised single endbell for Cahoza G27 can #80, lightened, longer endbell tower, better dissipates heat away, for arms with commutator caps, pattern hole drilled for horizontal hardware, diameter for cans is 16mm (.630"), these endbells are manufactured for shielded ball bearings 2,3mm (.090") wide | 128 | ea | 22.00 |
| SINGLE ENDBELL TALLER .630 +4° ROTATION FOR G27 CAHOZA CAN aluminium hard anodised single endbell for Cahoza G27 can #80, lightened, longer endbell tower, better dissipates heat away, for arms with commutator caps, pattern hole drilled for horizontal hardware and turned to +4°, diameter for cans is 16mm (.630"), these endbells are manufactured for shielded ball bearings 2,3mm (.090") wide | 128-4 | ea | 22.00 |
| description | # | QTY | USD |
|---|---|---|---|
| ASSEMBLED ENDBELL FOR G12 CANS aluminium hard anodised assembled endbell for all Cahoza C-cans (G12), gold plated horizontal hardware (#171), 3coil aluminium spring posts, includes stainless steel ball bearing, diameter for cans is 21,25mm (.837"), this endbell is made from very hard aluminium, perfectly dissipates heat away from brushes | 146 | ea | 72.00 |
| ASSEMBLED ENDBELL FOR G12 CANS +4° ROTATION aluminium hard anodised assembled endbell for all Cahoza C-cans (G12), gold plated horizontal hardware (#171) turned to +4°, 3coil aluminium spring posts, includes stainless steel ball bearing, diameter for cans is 21,25mm (.837"), this endbell is made from very hard aluminium, perfectly dissipates heat away from brushes | 146-4 | ea | 72.00 |
| ASSEMBLED ENDBELL #127 VERTICAL - TALLER assembled endbell #127, gold plated vertical hardware #170, 5 coil anodised spring posts, stainless steel shielded ball bearing 2,3mm wide included, fits Koford G7 can | 147 | ea | 60.00 |
| ASSEMBLED ENDBELL #127-4 VERTICAL +4° ROTATION - TALLER assembled endbell #127-4, gold plated vertical hardware #170 turned to +4°, 5 coil anodised spring posts, stainless steel shielded ball bearing 2,3mm wide included, fits Koford G7 can | 147-4 | ea | 60.00 |
| ASSEMBLED ENDBELL #128 HORIZONTAL - TALLER assembled endbell #128, gold plated horizontal hardware #171, 5 coil anodised spring posts, stainless steel shielded ball bearing 2,3mm wide included, fits Cahoza G27 can #80 | 148 | ea | 60.00 |
| ASSEMBLED ENDBELL #128-4 HORIZONTAL +4° ROTATION - TALLER assembled endbell #128-4, gold plated horizontal hardware #171 turned to +4°, 5 coil anodised spring posts, stainless steel shielded ball bearing 2,3mm wide included, fits Cahoza G27 can #80 | 148-4 | ea | 60.00 |
| description | # | QTY | USD |
|---|---|---|---|
| COMMUTATOR CAPS aluminium hard anodised commutator caps for G7, G27 and Scale armatures, packaged 10pcs per bag, for using these caps it is needed to mill the commutator to dia 4,72mm (+0,01mm), in length 1,3mm | 150 | bag | 30.00 |
| ANODISED SPRING POSTS - 3 COIL SPRINGS aluminium anodised spring posts for 3 coil springs, these spring posts do not fit Cahoza plastic G12 endbell, suitable for hardware #170 and #171, recommended are insulators #158 or #159, packaged 10 pairs per bag | 154 | bag | 37.60 |
| ANODISED SPRING POSTS - 5 COIL SPRINGS aluminium anodised spring posts for 5 coil springs, suitable for hardware #170 and #171, recommended are insulators #158 or #159, packaged 10 pairs per bag | 157 | bag | 39.80 |
| PHENOLIC INSULATORS phenolic insulators, use on all aluminium endbells, suitable for anodised spring posts #154, #157, inside diameter 1,5mm, outside diameter 3mm, thickness 0,5mm, packed by 24pcs | 158 | bag | 6.70 |
| PHENOLIC INSULATORS phenolic insulators, use on all aluminium endbells, suitable for anodised spring posts #154, #157, inside diameter 1,5mm, outside diameter 3mm, thickness 0,3mm, packed by 24pcs | 159 | bag | 6.70 |
| 5 COIL STEEL SPRINGS Cahoza springs for Scale motors and G27 motors, made from hardened steel coated with white shiny zinc, withstands 800F, these springs have got 8% more tension than the stainless steel springs, packaged 10 pairs per bag | 160 | bag | 38.00 |
| 5 COIL STAINLESS STEEL SPRINGS Cahoza springs for Scale motors and G27 motors, made from stainless steel, resists up to 800F, packaged 10 pairs per bag | 161 | bag | 36.00 |
| GOLD PLATED VERTICAL HARDWARE aluminium gold plated vertical hardware, high precision, this hardware have got larger cooling surface, deeper brush slots, another novelty is an upper little hook that ensures hardware will not tear off the endbell, hole pattern is the same as with #171, attention: before pressing the little hook to its final position, it is needed to grind out the layer of gold and nickel from upper side of the hook (0,05mm-0,1mm) | 170 | pair | 21.00 |
| GOLD PLATED VERTICAL HARDWARE PACK aluminium gold plated vertical hardware, high precision, this hardware have got larger cooling surface, deeper brush slots, another novelty is an upper little hook that ensures hardware will not tear off the endbell, hole pattern is the same as with #171, attention: before pressing the little hook to its final position, it is needed to grind out the layer of gold and nickel from upper side of the hook (0,05mm-0,1mm), packaged 6 pairs a bag | 170-V | bag | 120.00 |
| GOLD PLATED HORIZONTAL HARDWARE aluminium gold plated horizontal hardware, high precision, this hardware have got larger cooling surface, deeper brush slots, another novelty is an upper little hook that ensures hardware will not tear off the endbell, hole pattern is the same as with #170, attention: before pressing the little hook to its final position, it is needed to grind out the layer of gold and nickel from upper side of the hook (0,05mm-0,1mm) | 171 | pair | 21.00 |
| GOLD PLATED HORIZONTAL HARDWARE PACK aluminium gold plated horizontal hardware, high precision, this hardware have got larger cooling surface, deeper brush slots, another novelty is an upper little hook that ensures hardware will not tear off the endbell, hole pattern is the same as with #170, attention: before pressing the little hook to its final position, it is needed to grind out the layer of gold and nickel from upper side of the hook (0,05mm-0,1mm), packaged 6 pairs a bag | 171-H | bag | 120.00 |
| description | # | QTY | USD |
|---|---|---|---|
| C-CAN G12 MOTOR - O Cahoza C-can motor, assembled using "O" type C-can #250, Cahoza Tornado 2 magnets, Cahoza plastic endbell, Cahoza hardware #266, Cahoza aluminium spring cups, Cahoza tapping screws, Koford flanged oilites, Koford armature M468 -- Box TriStar G12 dia .518", perfectly balanced with shortened axle and cut down commutator, Koford brushes M486, Cahoza springs #257, magnets are glued in using Cahoza single component epoxy, inside diameter of magnets is 13,45mm (.529"), weight of complete motor is only 19,2 grammes, | 230 | ea | 90.70 |
| C-CAN G12 MOTOR - O - BEVELLED Cahoza C-can motor, assembled using "O" type C-can #250, Cahoza Tornado 2 bevelled magnets #276, Cahoza plastic endbell, Cahoza hardware #266, Cahoza aluminium spring cups, Cahoza tapping screws, Koford flanged oilites, Koford armature M468 -- Box TriStar G12 dia .518", perfectly balanced with shortened axle and cut down commutator, Koford brushes M486, Cahoza springs #257, magnets are glued in using Cahoza single component epoxy, inside diameter of magnets is 13,45mm (.529"), weight of complete motor is only 18,2 grammes | 230B | ea | 95.70 |
| C-CAN G12 SETUP - O Cahoza C-can setup, assembled using "O" type C-can #250, Cahoza Tornado 2 magnets, Cahoza plastic endbell, Cahoza hardware #266, Cahoza aluminium spring cups, Cahoza tapping screws, Koford flanged oilites, magnets are glued in using Cahoza single component epoxy, inside diameter of magnets is 13,45mm (.529"), weight 11,1 grammes | 230S | ea | 40.80 |
| C-CAN G12 SETUP - O - BEVELLED Cahoza C-can setup, assembled using "O" type C-can #250, Cahoza Tornado 2 bevelled magnets #276, Cahoza plastic endbell, Cahoza hardware #266, Cahoza aluminium spring cups, Cahoza tapping screws, Koford flanged oilites, magnets are glued in using Cahoza single component epoxy, inside diameter of magnets is 13,45mm (.529"), weight 10,1 grammes | 230SB | ea | 45.80 |
| C-CAN G12 MOTOR - U Cahoza C-can motor, assembled using "U" type C-can #251, Cahoza Tornado 2 magnets, Cahoza plastic endbell, Cahoza hardware #266, Cahoza aluminium spring cups, Cahoza tapping screws, Koford flanged oilites, Koford armature M468 -- Box TriStar G12 dia .518", perfectly balanced with shortened axle and cut down commutator, Koford brushes M486, Cahoza springs #257, magnets are glued in using Cahoza single component epoxy, inside diameter of magnets is 13,45mm (.529"), weight of complete motor is only 19,1 grammes | 231 | ea | 93.70 |
| C-CAN G12 MOTOR - U - BEVELLED Cahoza C-can motor, assembled using "U" type C-can #251, Cahoza Tornado 2 bevelled magnets #276, Cahoza plastic endbell, Cahoza hardware #266, Cahoza aluminium spring cups, Cahoza tapping screws, Koford flanged oilites, Koford armature M468 -- Box TriStar G12 dia .518", perfectly balanced with shortened axle and cut down commutator, Koford brushes M486, Cahoza springs #257, magnets are glued in using Cahoza single component epoxy, inside diameter of magnets is 13,45mm (.529"), weight of complete motor is only 18,1 grammes | 231B | ea | 98.70 |
| C-CAN G12 SETUP - U Cahoza C-can setup, assembled using "U" type C-can #251, Cahoza Tornado 2 magnets, Cahoza plastic endbell, Cahoza hardware #266, Cahoza aluminium spring cups, Cahoza tapping screws, Koford flanged oilites, magnets are glued in using Cahoza single component epoxy, inside diameter of magnets is 13,45mm (.529"), weight 11 grammes | 231S | ea | 43.80 |
| C-CAN G12 SETUP - U - BEVELLED Cahoza C-can setup, assembled using "U" type C-can #251, Cahoza Tornado 2 bevelled magnets #276, Cahoza plastic endbell, Cahoza hardware #266, Cahoza aluminium spring cups, Cahoza tapping screws, Koford flanged oilites, magnets are glued in using Cahoza single component epoxy, inside diameter of magnets is 13,45mm (.529"), weight 10 grammes | 231SB | ea | 48.80 |
| C-CAN G12 MOTOR - UL Cahoza C-can motor, assembled using "UL" type C-can #252, Cahoza Tornado 2 magnets, Cahoza plastic endbell, Cahoza hardware #266, Cahoza aluminium spring cups, Cahoza tapping screws, Koford flanged oilites, Koford armature M468 -- Box TriStar G12 dia .518", perfectly balanced with shortened axle and cut down commutator, Koford brushes M486, Cahoza springs #257, magnets are glued in using Cahoza single component epoxy, inside diameter of magnets is 13,45mm (.529"), weight of complete motor is only 19 grammes | 232 | ea | 108.70 |
| C-CAN G12 MOTOR - UL - BEVELLED Cahoza C-can motor, assembled using "UL" type C-can #252, Cahoza Tornado 2 bevelled magnets #276, Cahoza plastic endbell, Cahoza hardware #266, Cahoza aluminium spring cups, Cahoza tapping screws, Koford flanged oilites, Koford armature M468 -- Box TriStar G12 dia .518", perfectly balanced with shortened axle and cut down commutator, Koford brushes M486, Cahoza springs #257, magnets are glued in using Cahoza single component epoxy, inside diameter of magnets is 13,45mm (.529"), weight of complete motor is only 18 grammes | 232B | ea | 113.70 |
| C-CAN G12 SETUP - UL Cahoza C-can setup, assembled using "UL" type C-can #252, Cahoza Tornado 2 magnets, Cahoza plastic endbell, Cahoza hardware #266, Cahoza aluminium spring cups, Cahoza tapping screws, Koford flanged oilites, magnets are glued in using Cahoza single component epoxy, inside diameter of magnets is 13,45mm (.529"), weight of complete setup is only 10,9 grammes | 232S | ea | 63.80 |
| C-CAN G12 SETUP - UL - BEVELLED Cahoza C-can setup, assembled using "UL" type C-can #252, Cahoza Tornado 2 bevelled magnets #276, Cahoza plastic endbell, Cahoza hardware #266, Cahoza aluminium spring cups, Cahoza tapping screws, Koford flanged oilites, magnets are glued in using Cahoza single component epoxy, inside diameter of magnets is 13,45mm (.529"), weight of complete setup is only 9,9 grammes | 232SB | ea | 68.80 |
| description | # | QTY | USD |
|---|---|---|---|
| G12 MOTOR TYPE O Cahoza C-can motor, features Cahoza C-can #250, Cahoza Tornado 5 magnets, Cahoza endbell #262, Cahoza spring cups, 2x5 precisely turned oilites, best Koford brushes, 3 coil springs, Koford X12 .518" armature, Cahoza screws, professionaly assembled, absolutely the most precise and the fastest among all motors, weight 19,2 grammes | 235-O | ea | 137.40 |
| G12 MOTOR TYPE U Cahoza C-can motor, features Cahoza C-can #251, Cahoza Tornado 5 magnets, Cahoza endbell #262, Cahoza spring cups, 2x5 precisely turned oilites, best Koford brushes, 3 coil springs, Koford X12 .518" armature, Cahoza screws, professionaly assembled, absolutely the most precise and the fastest among all motors, weight 19,1 grammes | 235-U | ea | 140.40 |
| G12 MOTOR TYPE O Cahoza C-can motor, features Cahoza C-can #250, Cahoza Tornado 5 magnets, Cahoza endbell #262, Cahoza spring cups, 2x5 precisely turned oilite in endbell, ball bearing in can, best Koford brushes, 3 coil springs, Koford X12 .518" armature, Cahoza screws, professionaly assembled, absolutely the most precise and the fastest among all motors, weight 19,2 grammes | 236-O | ea | 149.40 |
| G12 MOTOR TYPE U Cahoza C-can motor, features Cahoza C-can #251, Cahoza Tornado 5 magnets, Cahoza endbell #262, Cahoza spring cups, 2x5 precisely turned oilite in endbell, ball bearing in can, best Koford brushes, 3 coil springs, Koford X12 .518" armature, Cahoza screws, professionaly assembled, absolutely the most precise and the fastest among all motors, weight 19,1 grammes | 236-U | ea | 152.40 |
| G12 MOTOR TYPE UL Cahoza C-can motor, features Cahoza C-can #252, Cahoza Tornado 5 magnets, Cahoza endbell #262, Cahoza spring cups, 2x5 precisely turned oilite in endbell, ball bearing in can, best Koford brushes, 3 coil springs, Koford X12 .518" armature, Cahoza screws, professionaly assembled, absolutely the most precise and the fastest among all motors, weight 19 grammes | 236-UL | ea | 167.40 |
| G12 MOTOR TYPE O -- GOLD Cahoza C-can motor, features Cahoza C-can #250, Cahoza Tornado 5 magnets, Cahoza endbell #263, Cahoza spring cups, ball bearings both in can and endbell, best Koford brushes, 3 coil teflon insulated springs, silver shunt wire, Koford X12 .518" armature, Cahoza screws, professionaly assembled, absolutely the most precise and the fastest among all motors, weight 19,2 grammes | 237-O | ea | 169.80 |
| G12 MOTOR TYPE U -- GOLD Cahoza C-can motor, features Cahoza C-can #251, Cahoza Tornado 5 magnets, Cahoza endbell #263, Cahoza spring cups, ball bearings both in can and endbell, best Koford brushes, 3 coil teflon insulated springs, silver shunt wire, Koford X12 .518" armature, Cahoza screws, professionaly assembled, absolutely the most precise and the fastest among all motors, weight 19,1 grammes | 237-U | ea | 172.80 |
| G12 MOTOR TYPE UL -- GOLD Cahoza C-can motor, features Cahoza C-can #252, Cahoza Tornado 5 magnets, Cahoza endbell #263, Cahoza spring cups, ball bearings both in can and endbell, best Koford brushes, 3 coil teflon insulated springs, silver shunt wire, Koford X12 .518" armature, Cahoza screws, professionaly assembled, absolutely the most precise and the fastest among all motors, weight 19 grammes | 237-UL | ea | 187.80 |
| PROFI G12 MOTOR TYPE O Cahoza C-can motor, features Cahoza C-can #250, Cahoza Tornado 5 magnets, Cahoza aluminium endbell #146, Cahoza spring cups, ball bearings both in can and endbell, best Koford brushes, 3 coil teflon insulated springs, silver shunt wire, Koford X12 .518" armature, Cahoza screws, professionaly assembled, absolutely the most precise and the fastest among all motors, weight 19 grammes | 238-O | ea | 188.80 |
| PROFI G12 MOTOR TYPE U Cahoza C-can motor, features Cahoza C-can #251, Cahoza Tornado 5 magnets, Cahoza endbell #146, Cahoza spring cups, ball bearings both in can and endbell, best Koford brushes, 3 coil teflon insulated springs, silver shunt wire, Koford X12 .518" armature, Cahoza screws, professionaly assembled, absolutely the most precise and the fastest among all motors, weight 18,9 grammes | 238-U | ea | 191.80 |
| PROFI G12 MOTOR TYPE UL Cahoza C-can motor, features Cahoza C-can #252, Cahoza Tornado 5 magnets, Cahoza endbell #146, Cahoza spring cups, ball bearings both in can and endbell, best Koford brushes, 3 coil teflon insulated springs, silver shunt wire, Koford X12 .518" armature, Cahoza screws, professionaly assembled, absolutely the most precise and the fastest among all motors, weight 18,8 grammes | 238-UL | ea | 206.80 |
| description | # | QTY | USD |
|---|---|---|---|
| G12 SETUP TYPE O Cahoza C-can motor, features Cahoza C-can #250, Cahoza Tornado 5 magnets, Cahoza endbell #262, Cahoza spring cups, 2x5 precisely turned oilites, Cahoza screws, professionaly assembled, for .518" armatures, Koford ones are recommended, weight 11,1 grammes | 241-O | ea | 72.40 |
| G12 SETUP TYPE U Cahoza C-can motor, features Cahoza C-can #251, Cahoza Tornado 5 magnets, Cahoza endbell #262, Cahoza spring cups, 2x5 precisely turned oilites, Cahoza screws, professionaly assembled, for .518" armatures, Koford ones are recommended, weight 11 grammes | 241-U | ea | 75.40 |
| G12 SETUP TYPE O Cahoza C-can motor, features Cahoza C-can #250, Cahoza Tornado 5 magnets, Cahoza endbell #262, Cahoza spring cups, 2x5 precisely turned oilite in endbell, ball bearing in can, Cahoza screws, professionaly assembled, for .518" armatures, Koford ones are recommended, weight 11,1 grammes | 242-O | ea | 84.40 |
| G12 SETUP TYPE U Cahoza C-can motor, features Cahoza C-can #251, Cahoza Tornado 5 magnets, Cahoza endbell #262, Cahoza spring cups, 2x5 precisely turned oilite in endbell, ball bearing in can, Cahoza screws, professionaly assembled, for .518" armatures, Koford ones are recommended, weight 11 grammes | 242-U | ea | 87.40 |
| G12 SETUP TYPE UL Cahoza C-can motor, features Cahoza C-can #252, Cahoza Tornado 5 magnets, Cahoza endbell #262, Cahoza spring cups, 2x5 precisely turned oilite in endbell, ball bearing in can, Cahoza screws, professionaly assembled, for .518" armatures, Koford ones are recommended, weight 10,9 grammes | 242-UL | ea | 107.40 |
| G12 SETUP TYPE O -- GOLD Cahoza C-can motor, features Cahoza C-can #250, Cahoza Tornado 5 magnets, Cahoza endbell #263, Cahoza spring cups, ball bearing both in can and endbell, Cahoza screws, professionaly assembled, for .518" armatures, Koford ones are recommended, weight 11,1 grammes | 243-O | ea | 107.60 |
| G12 SETUP TYPE U -- GOLD Cahoza C-can motor, features Cahoza C-can #251, Cahoza Tornado 5 magnets, Cahoza endbell #263, Cahoza spring cups, ball bearing both in can and endbell, Cahoza screws, professionaly assembled, for .518" armatures, Koford ones are recommended, weight 11 grammes | 243-U | ea | 110.60 |
| G12 SETUP TYPE UL -- GOLD Cahoza C-can motor, features Cahoza C-can #252, Cahoza Tornado 5 magnets, Cahoza endbell #263, Cahoza spring cups, ball bearing both in can and endbell, Cahoza screws, professionaly assembled, for .518" armatures, Koford ones are recommended, weight 10,9 grammes | 243-UL | ea | 130.60 |
| PROFI G12 SETUP TYPE O Cahoza C-can setup, features Cahoza C-can #250, Cahoza Tornado 5 magnets, Cahoza aluminium endbell #146, Cahoza spring cups, ball bearing both in can and endbell, Cahoza screws, professionaly assembled, for .518" armatures, Koford ones are recommended, weight 10,9 grammes | 244-O | ea | 124.60 |
| PROFI G12 SETUP TYPE U Cahoza C-can setup, features Cahoza C-can #251, Cahoza Tornado 5 magnets, Cahoza aluminium endbell #146, Cahoza spring cups, ball bearing both in can and endbell, Cahoza screws, professionaly assembled, for .518" armatures, Koford ones are recommended, weight 10,8 grammes | 244-U | ea | 127.60 |
| PROFI G12 SETUP TYPE UL Cahoza C-can setup, features Cahoza C-can #252, Cahoza Tornado 5 magnets, Cahoza aluminium endbell #146, Cahoza spring cups, ball bearing both in can and endbell, Cahoza screws, professionaly assembled, for .518" armatures, Koford ones are recommended, weight 10,7 grammes | 244-UL | ea | 147.60 |
| description | # | QTY | USD |
|---|---|---|---|
| C-CAN TYPE O Cahoza C-can, produced from 0,4mm (.0157") thick hardmetal plate, the whole unrolled shape of can is made by EDM, then it is bend on precise hand tooling to the final shape, on sides weld by pulse laser, then holes for screws and oilites are drilled using precise templates, can is made by hand so that perfect accuracy is conserved, outside diameter is 21,25mm (.836"), can is plated by high quality shiny nickel, all the sizes are in 0,03mm (.00118") tolerance, this can is very tough although it weighs only 2,32 grammes | 250 | ea | 18.00 |
| C-CAN TYPE U Cahoza C-can, produced from 0,4mm (.0157") thick hardmetal plate, the whole unrolled shape of can is made by EDM, then it is bend on precise hand tooling to the final shape, on sides weld by pulse laser, then holes for screws and oilites are drilled using precise templates, can is made by hand so that perfect accuracy is conserved, outside diameter is 21,25mm (.836"), can is plated by high quality shiny nickel, all the sizes are in 0,03mm (.00118") tolerance, this can is very tough although it weighs only 2,22 grammes | 251 | ea | 22.00 |
| C-CAN TYPE UL Cahoza C-can, produced from 0,4mm (.0157") thick hardmetal plate, the whole unrolled shape of can is made by EDM, then it is bend on precise hand tooling to the final shape, on sides weld by pulse laser, then holes for screws and oilites are drilled using precise templates, can is made by hand so that perfect accuracy is conserved, outside diameter is 21,25mm (.836"), can is plated by high quality shiny nickel, all the sizes are in 0,03mm (.00118") tolerance, this can is very tough although it weighs only 2,10 grammes | 252 | ea | 39.00 |
| 3 COIL STAINLESS STEEL SPRINGS Cahoza springs for G12, Cobalt 12, INT15 motors, made from stainless steel, resists up to 800F, packaged 10 pairs per bag | 254 | bag | 27.80 |
| 3 COIL STEEL SPRINGS Cahoza springs for G12, Cobalt 12, INT15, G27 motors and G7 qualification motors, made from hardened steel coated with white shiny zinc, withstands 800F, these springs have got 8% more tension than the stainless steel springs, packaged 10 pairs per bag | 255 | bag | 29.80 |
| LIGHT PROFI ENDBELLS polymer light profi endbells for Cahoza C-can, available in 4 colors, weight only 0,7 grammes | 257 | ea | 5.20 |
| LIGHT PROFI ENDBELLS PACK polymer light profi endbells for Cahoza C-can, available in 4 colors, weight only 0,7 grammes, packaged 6 pieces a bag | 257-A | bag | 30.00 |
| ASSEMBLED ENDBELL FOR C-CANS assembled endbell for C-cans, includes oilite bearing, aluminium brush hoods #266, professional work out, weighs 2 grammes | 262 | ea | 23.20 |
| PROFI TOP ASSEMBLED ENDBELL assembled endbell for C-cans, includes ball bearing, professional work out, anodised spring posts, weight 2 grammes, professional brush hoods #268 | 263 | ea | 49.00 |
| ALUMINIUM NICKEL PLATED BRUSH HOODS hardware (brush hoods), made from hard aluminium plate with thickness of 0.4mm (.0157"), nickel plated, hand work, most precise, no more grinding or drilling, when fitted onto an endbell perfectly ensure that brushes are precisely centered to the armature axis and also brush clearance is the smallest possible in these hardware, these hoods are compatible with Pro Slot #711 plastic endbells, weigh only 0,4 grammes, these brush hoods are perfect in dissipating heat away, packaged 6 pairs per bag | 266 | bag | 46.00 |
| PROFESSIONAL ALUMINIUM GOLD PLATED BRUSH HOODS professional hardware (brush hoods) with heatsinks, made from hard aluminium plate with thickness of 0.4mm (.0157"), gold plated, hand work, most precise, no more grinding or drilling, when fitted onto an endbell perfectly ensure that brushes are precisely centered to the armature axis and also brush clearance is the smallest possible in these hardware, weigh only 0,6 grammes, these brush hoods dissipates 50% more heat away than #266, packaged 6 pairs per bag | 268 | bag | 132.00 |
| ALUMINIUM SPRING POSTS these spring posts match with 3 coil springs #254 or #255 and hardware #266 or #268 for endbell #257, diameter for springs is 3,65 mm (.140"), length is 2,2 mm, springs are perfectly fastened and do not loose at all, packed 10 pairs per bag | 270 | bag | 15.00 |
| ANODISED ALUMINIUM SPRING POSTS these anodised spring posts match with 3 coil springs #254 or #255 and hardware #266 or #268 for endbell #257, diameter for springs is 3,65 mm (.140"), length is 2,2 mm, springs are perfectly fastened and do not loose at all, packed 10 pairs per bag | 270-A | bag | 32.40 |
| NEW HORIZONTAL MOTOR BRUSHES the development of these motor brushes took 3 years and it was done with 2KK cooperation. Cahoza performed testing and comes to the conclusion that these are the good ones. Packed 50 pairs per bag. | 350 | bag | 160.00 |
| NEW HORIZONTAL MOTOR BRUSHES the development of these motor brushes took 3 years and it was done with 2KK cooperation. Cahoza performed testing and comes to the conclusion that these are the good ones. Packed 10 pairs per bag. | 351 | bag | 33.00 |
| description | # | QTY | USD |
|---|---|---|---|
| CAHOZA TORNADO 2 MAGNETS these magnets are produced from special Japanese material, they are manufactured using anisotropic technology and after zapping the magnetic lines are radially oriented, height 14,15mm (.555"), length 11,5mm (.453"), thickness 3,85mm (.152"), weight 6,58 grammes, Tornado 2 magnets are marked with white dot, magnets are legal for USRA and ISRA | 275 | pair | 10.20 |
| CAHOZA TORNADO 2 BEVELLED MAGNETS the same as #275 magnets, but feature 16-degree cut, weight 5,96 grammes, these magnets are legal for USRA and ISRA | 276 | pair | 15.60 |
| CAHOZA TORNADO 5 MAGNETS these popular magnets are identical as #275 (Tornado 2 magnets) but specially recharged, selected for maximum strength and matched, weight 6,58 grammes, Tornado 5 magnets are marked with yellow dot, magnets are legal for USRA and ISRA | 277 | pair | 12.80 |
| CAHOZA TORNADO 5 BEVELLED MAGNETS the same as #277 magnets, but feature 16-degree cut, weight 5,96 grammes, these magnets are legal for USRA and ISRA | 278 | pair | 23.60 |
| description | # | QTY | USD |
|---|---|---|---|
| BRASS BODY PIN STARS hard brass body pin stars, design by Cahoza, thickness 0,17mm (.00708"), very precise, packaged 24 per bag | 299 | bag | 2.60 |
| description | # | QTY | USD |
|---|---|---|---|
| CAHOZA T-SHIRT -- FRESH IDEAS 100% pure cotton, black color, available in XL, XXL or 3XL size, always specify size when ordering | 310 | ea | 26.00 |
| CAHOZA T-SHIRT -- MY BEST! 100% pure cotton, black color, available in XL or XXL, always specify size when ordering | 312 | ea | 26.00 |
| description | # | QTY | USD |
|---|---|---|---|
| SHORT MOTOR 12V-21,500 RPM new short can motor 12V-21,500 rpm. This motor is fitted with better commutator and longer brushes for higher endurance. Armature is axially aligned to the magnetic field for improved performance. The armature is engraved with RPM. Shaft dia is 2mm. | 280 | ea | 12.20 |
| SHORT MOTOR 12V-25,000 RPM short can motor 12V-25,000 rpm. Armature is axially aligned to the magnetic field for the best performance. Shaft dia is 2mm. | 281 | ea | 12.20 |
| SHORT MOTOR 12V-40,000 RPM short can motor 12V-40,000 rpm. Armature is axially aligned to the magnetic field for the best performance. Shaft dia is 2mm. | 282 | ea | 12.20 |
| SHORT MOTOR 12V-30,000 RPM new short can motor 12V-30,000 rpm. This motor is fitted with better commutator and longer brushes for higher endurance. Armature is axially aligned to the magnetic field for improved performance. The armature is engraved with RPM. Shaft dia is 2mm. | 283 | ea | 12.20 |
| LONG MOTOR 12V-25,000 RPM new long can motor 12V-25,000 rpm. This motor is fitted with better commutator and longer brushes for higher endurance. Armature is axially aligned to the magnetic field for improved performance. The armature is engraved with RPM. Shaft dia is 2mm. | 291 | ea | 13.40 |
| LONG MOTOR 12V-30,000 RPM new long can motor 12V-30,000 rpm. This motor is fitted with better commutator and longer brushes for higher endurance. Armature is axially aligned to the magnetic field for improved performance. The armature is engraved with RPM. Shaft dia is 2mm. | 292 | ea | 13.40 |
| LONG MOTOR 12V-40,000 RPM new long can motor 12V-40,000 rpm. This motor is fitted with better commutator and longer brushes for higher endurance. Armature is axially aligned to the magnetic field for improved performance. The armature is engraved with RPM. Shaft dia is 2mm. | 293 | ea | 13.40 |
| LONG MOTOR 12V-48,000 RPM new long can motor 12V-48,000 rpm. This motor is fitted with better commutator and longer brushes for higher endurance. Armature is axially aligned to the magnetic field for improved performance. The armature is engraved with RPM. Shaft dia is 2mm. | 294 | ea | 13.40 |
| description | # | QTY | USD |
|---|---|---|---|
| PROFI TAPPING SCREWS Cahoza profi tapping screws for plastic endbells, thread diameter is 1,52mm (.0598"), length thread is 4 mm (.157"), head diameter is 2,8mm (.011"), bolt head high is 1,2mm (.047"), for imbus Tip .051", screws are black coated, packed by 24 pcs per bag | 273 | bag | 18.00 |
| 4-40 CUP POINT SETSCREWS use for attaching tires and gears to axle, length only 3/32", for .050" imbus tip, packed 24 pcs per bag | 321 | bag | 16.80 |
| SELF TAPPING SCREWS self tapping screws for plastic endbells, thread diameter is 1,52mm (.0598"), length thread is 4 mm (.157"), head diameter is 2,8mm (.011"), bolt head high is 0,8mm (.031"), for T5 driver, screws are black coated, packed by 24 pcs per bag | 323 | bag | 17.80 |
| 0-80 ALUMINIUM SCREWS use for attaching Aluminium endbells to steel cans or for aluminium endbel assembing, thread length is 2,2mm (.087"), head diameter is 2,4mm (.094"), bolt head height is 1mm (.039"), for T5 driver, packed by 24 pcs per bag | 324 | bag | 22.80 |
| 0-80 STAINLESS STEEL SCREWS use for attaching Aluminium endbells to steel cans, thread length is 1,75mm (.069"), bolt head height is 1mm (.039"), for T5 driver, packed 24 pcs per bag | 325 | bag | 13.20 |